This is the latest recevied telemetry packets stored in our database for station/object SR2JP-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1773454353 | 213 Count | 768 Count | 1 Count | 0 VDC | 0 VDC |
| 1773452671 | 212 Count | 760 Count | 1 Count | 0 VDC | 0 VDC |
| 1773450991 | 211 Count | 757 Count | 1 Count | 0 VDC | 0 VDC |
| 1773439473 | 200 Count | 737 Count | 1 Count | 0 VDC | 0 VDC |
| 1773437792 | 199 Count | 734 Count | 1 Count | 0 VDC | 0 VDC |
| 1773436111 | 198 Count | 731 Count | 1 Count | 0 VDC | 0 VDC |
| 1773434431 | 197 Count | 728 Count | 1 Count | 0 VDC | 0 VDC |
| 1773432750 | 196 Count | 726 Count | 1 Count | 0 VDC | 0 VDC |
| 1773431069 | 195 Count | 718 Count | 1 Count | 0 VDC | 0 VDC |
| 1773429388 | 194 Count | 715 Count | 1 Count | 0 VDC | 0 VDC |
| 1773427707 | 192 Count | 712 Count | 1 Count | 0 VDC | 0 VDC |
| 1773404679 | 171 Count | 652 Count | 1 Count | 0 VDC | 0 VDC |
| 1773402997 | 170 Count | 647 Count | 1 Count | 0 VDC | 0 VDC |
| 1773401316 | 169 Count | 643 Count | 1 Count | 0 VDC | 0 VDC |
| 1773399636 | 168 Count | 638 Count | 1 Count | 0 VDC | 0 VDC |
| 1773397955 | 167 Count | 633 Count | 1 Count | 0 VDC | 0 VDC |
| 1773396274 | 166 Count | 627 Count | 1 Count | 0 VDC | 0 VDC |
| 1773394593 | 165 Count | 622 Count | 1 Count | 0 VDC | 0 VDC |
| 1773392913 | 164 Count | 617 Count | 1 Count | 0 VDC | 0 VDC |
| 1773391232 | 163 Count | 612 Count | 1 Count | 0 VDC | 0 VDC |
| 1773389551 | 162 Count | 608 Count | 1 Count | 0 VDC | 0 VDC |
| 1773387870 | 161 Count | 600 Count | 1 Count | 0 VDC | 0 VDC |
| 1773386189 | 160 Count | 593 Count | 1 Count | 0 VDC | 0 VDC |
| 1773384509 | 158 Count | 589 Count | 1 Count | 0 VDC | 0 VDC |
| 1773383081 | 154 Count | 585 Count | 1 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)