This is the latest recevied telemetry packets stored in our database for station/object IU3ISP-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1777397004 | 131 Count | 455 Count | 86 Count | 0 VDC | 0 VDC |
| 1777395200 | 126 Count | 442 Count | 82 Count | 0 VDC | 0 VDC |
| 1777391592 | 119 Count | 431 Count | 77 Count | 0 VDC | 0 VDC |
| 1777389832 | 112 Count | 429 Count | 75 Count | 0 VDC | 0 VDC |
| 1777386224 | 105 Count | 420 Count | 70 Count | 0 VDC | 0 VDC |
| 1777384420 | 102 Count | 414 Count | 68 Count | 0 VDC | 0 VDC |
| 1777382617 | 98 Count | 407 Count | 65 Count | 0 VDC | 0 VDC |
| 1777380813 | 95 Count | 405 Count | 63 Count | 0 VDC | 0 VDC |
| 1777379009 | 92 Count | 403 Count | 61 Count | 0 VDC | 0 VDC |
| 1777377205 | 89 Count | 401 Count | 59 Count | 0 VDC | 0 VDC |
| 1777375401 | 86 Count | 399 Count | 57 Count | 0 VDC | 0 VDC |
| 1777373597 | 82 Count | 393 Count | 54 Count | 0 VDC | 0 VDC |
| 1777369989 | 75 Count | 372 Count | 49 Count | 0 VDC | 0 VDC |
| 1777368229 | 68 Count | 370 Count | 47 Count | 0 VDC | 0 VDC |
| 1777366425 | 65 Count | 368 Count | 45 Count | 0 VDC | 0 VDC |
| 1777364621 | 62 Count | 366 Count | 43 Count | 0 VDC | 0 VDC |
| 1777362818 | 59 Count | 364 Count | 41 Count | 0 VDC | 0 VDC |
| 1777359210 | 52 Count | 355 Count | 36 Count | 0 VDC | 0 VDC |
| 1777357406 | 49 Count | 353 Count | 34 Count | 0 VDC | 0 VDC |
| 1777355602 | 46 Count | 351 Count | 32 Count | 0 VDC | 0 VDC |
| 1777353798 | 43 Count | 349 Count | 30 Count | 0 VDC | 0 VDC |
| 1777351994 | 40 Count | 324 Count | 28 Count | 0 VDC | 0 VDC |
| 1777350190 | 35 Count | 291 Count | 24 Count | 0 VDC | 0 VDC |
| 1777348387 | 31 Count | 257 Count | 21 Count | 0 VDC | 0 VDC |
| 1777346640 | 23 Count | 229 Count | 18 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)