This is the latest recevied telemetry packets stored in our database for station/object F4FWW-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1777394850 | 692 Count | 381 Count | 376 Count | 0 VDC | 0 VDC |
| 1777393050 | 690 Count | 380 Count | 375 Count | 0 VDC | 0 VDC |
| 1777391249 | 688 Count | 379 Count | 374 Count | 0 VDC | 0 VDC |
| 1777389448 | 686 Count | 378 Count | 373 Count | 0 VDC | 0 VDC |
| 1777387648 | 684 Count | 377 Count | 372 Count | 0 VDC | 0 VDC |
| 1777385847 | 682 Count | 376 Count | 371 Count | 0 VDC | 0 VDC |
| 1777384046 | 680 Count | 375 Count | 370 Count | 0 VDC | 0 VDC |
| 1777382245 | 678 Count | 374 Count | 369 Count | 0 VDC | 0 VDC |
| 1777380445 | 676 Count | 373 Count | 368 Count | 0 VDC | 0 VDC |
| 1777378644 | 674 Count | 372 Count | 367 Count | 0 VDC | 0 VDC |
| 1777376843 | 673 Count | 372 Count | 367 Count | 0 VDC | 0 VDC |
| 1777375043 | 671 Count | 371 Count | 366 Count | 0 VDC | 0 VDC |
| 1777373247 | 669 Count | 370 Count | 365 Count | 0 VDC | 0 VDC |
| 1777371446 | 667 Count | 369 Count | 364 Count | 0 VDC | 0 VDC |
| 1777369645 | 665 Count | 368 Count | 363 Count | 0 VDC | 0 VDC |
| 1777367845 | 663 Count | 367 Count | 362 Count | 0 VDC | 0 VDC |
| 1777366044 | 662 Count | 367 Count | 362 Count | 0 VDC | 0 VDC |
| 1777364243 | 660 Count | 366 Count | 361 Count | 0 VDC | 0 VDC |
| 1777362443 | 658 Count | 365 Count | 360 Count | 0 VDC | 0 VDC |
| 1777360642 | 656 Count | 364 Count | 359 Count | 0 VDC | 0 VDC |
| 1777358841 | 654 Count | 363 Count | 358 Count | 0 VDC | 0 VDC |
| 1777357041 | 653 Count | 363 Count | 358 Count | 0 VDC | 0 VDC |
| 1777355240 | 651 Count | 362 Count | 357 Count | 0 VDC | 0 VDC |
| 1777353439 | 649 Count | 361 Count | 356 Count | 0 VDC | 0 VDC |
| 1777351648 | 647 Count | 360 Count | 355 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)