This is the latest recevied telemetry packets stored in our database for station/object VK3FUR-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | ign* | speed* | rpm* | gear* | sprt* |
|---|---|---|---|---|---|
| 1746343729 | 3 | 6 | 835 | 0 | 0 |
| 1746343609 | 3 | 0 | 767 | 4 | 0 |
| 1746343489 | 3 | 39 | 2485 | 0 | 0 |
| 1746343129 | 3 | 68 | 1864 | 0 | 0 |
| 1746343009 | 3 | 76 | 1060 | 0 | 0 |
| 1746342889 | 3 | 75 | 2156 | 0 | 0 |
| 1746342769 | 3 | 75 | 1967 | 0 | 0 |
| 1746342649 | 3 | 75 | 1933 | 0 | 0 |
| 1746342529 | 3 | 76 | 1924 | 0 | 0 |
| 1746342409 | 3 | 76 | 2208 | 0 | 0 |
| 1746342289 | 3 | 79 | 2234 | 0 | 0 |
| 1746342169 | 3 | 80 | 1803 | 0 | 0 |
| 1746342049 | 3 | 88 | 1978 | 0 | 0 |
| 1746341929 | 3 | 96 | 2391 | 0 | 0 |
| 1746341809 | 3 | 95 | 2366 | 0 | 0 |
| 1746341689 | 3 | 97 | 2317 | 0 | 0 |
| 1746341569 | 3 | 101 | 2034 | 0 | 0 |
| 1746341449 | 3 | 100 | 2014 | 0 | 0 |
| 1746341329 | 3 | 99 | 1974 | 0 | 0 |
| 1746341209 | 3 | 102 | 2553 | 0 | 0 |
| 1746341089 | 3 | 40 | 1961 | 0 | 0 |
| 1746340969 | 0 | 0 | 909 | 4 | 0 |
| 1746340849 | 0 | 0 | 909 | 4 | 0 |
| 1746340729 | 3 | 94 | 2562 | 0 | 0 |
| 1746340609 | 3 | 105 | 2239 | 0 | 0 |
*Used Equation Coefficients:
ign: 0, 1, 0
speed: 0, 1, 0
rpm: 0, 1, 0
gear: 0, 1, 0
sprt: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)