This is the latest recevied telemetry packets stored in our database for station/object SQ2CPA-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789684709 | 332 Count | 525 Count | 246 Count | 4.1 VDC | 0 VDC |
| 1789682911 | 323 Count | 463 Count | 238 Count | 4.1 VDC | 0 VDC |
| 1789681112 | 315 Count | 409 Count | 231 Count | 4.1 VDC | 0 VDC |
| 1789679313 | 309 Count | 394 Count | 226 Count | 4.1 VDC | 0 VDC |
| 1789677513 | 304 Count | 383 Count | 222 Count | 4.1 VDC | 0 VDC |
| 1789675716 | 299 Count | 367 Count | 218 Count | 4.1 VDC | 0 VDC |
| 1789673919 | 293 Count | 354 Count | 213 Count | 4.1 VDC | 0 VDC |
| 1789672120 | 287 Count | 338 Count | 208 Count | 4.1 VDC | 0 VDC |
| 1789670321 | 282 Count | 327 Count | 204 Count | 4.1 VDC | 0 VDC |
| 1789668525 | 277 Count | 319 Count | 200 Count | 4.1 VDC | 0 VDC |
| 1789666728 | 272 Count | 310 Count | 196 Count | 4.1 VDC | 0 VDC |
| 1789664931 | 266 Count | 298 Count | 191 Count | 4.11 VDC | 0.9 VDC |
| 1789663135 | 262 Count | 290 Count | 188 Count | 4.11 VDC | 5.54 VDC |
| 1789661339 | 258 Count | 286 Count | 185 Count | 4.11 VDC | 5.54 VDC |
| 1789659543 | 254 Count | 282 Count | 182 Count | 4.11 VDC | 5.54 VDC |
| 1789657747 | 250 Count | 278 Count | 179 Count | 4.12 VDC | 5.56 VDC |
| 1789655952 | 246 Count | 274 Count | 176 Count | 4.12 VDC | 5.56 VDC |
| 1789654156 | 242 Count | 270 Count | 173 Count | 4.12 VDC | 5.56 VDC |
| 1789652360 | 239 Count | 267 Count | 171 Count | 4.12 VDC | 5.56 VDC |
| 1789650563 | 235 Count | 263 Count | 168 Count | 4.12 VDC | 5.56 VDC |
| 1789648768 | 231 Count | 260 Count | 165 Count | 4.12 VDC | 5.56 VDC |
| 1789646972 | 227 Count | 256 Count | 162 Count | 4.13 VDC | 5.58 VDC |
| 1789645173 | 223 Count | 252 Count | 159 Count | 4.13 VDC | 5.58 VDC |
| 1789643376 | 219 Count | 248 Count | 156 Count | 4.13 VDC | 5.58 VDC |
| 1789641578 | 215 Count | 244 Count | 153 Count | 4.13 VDC | 5.56 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)