This is the latest recevied telemetry packets stored in our database for station/object OK1OBR-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792871238 | 634 Count | 391 Count | 264 Count | 0 VDC | 0 VDC |
| 1792869434 | 633 Count | 391 Count | 264 Count | 0 VDC | 0 VDC |
| 1792867630 | 632 Count | 390 Count | 264 Count | 0 VDC | 0 VDC |
| 1792865827 | 631 Count | 390 Count | 264 Count | 0 VDC | 0 VDC |
| 1792864023 | 630 Count | 389 Count | 264 Count | 0 VDC | 0 VDC |
| 1792862219 | 629 Count | 389 Count | 264 Count | 0 VDC | 0 VDC |
| 1792860415 | 628 Count | 388 Count | 264 Count | 0 VDC | 0 VDC |
| 1792858611 | 627 Count | 388 Count | 264 Count | 0 VDC | 0 VDC |
| 1792856807 | 626 Count | 387 Count | 264 Count | 0 VDC | 0 VDC |
| 1792855003 | 625 Count | 387 Count | 264 Count | 0 VDC | 0 VDC |
| 1792853245 | 624 Count | 386 Count | 264 Count | 0 VDC | 0 VDC |
| 1792851441 | 623 Count | 386 Count | 264 Count | 0 VDC | 0 VDC |
| 1792849637 | 622 Count | 385 Count | 264 Count | 0 VDC | 0 VDC |
| 1792847833 | 621 Count | 385 Count | 264 Count | 0 VDC | 0 VDC |
| 1792846029 | 620 Count | 384 Count | 264 Count | 0 VDC | 0 VDC |
| 1792844226 | 619 Count | 384 Count | 264 Count | 0 VDC | 0 VDC |
| 1792842422 | 618 Count | 383 Count | 264 Count | 0 VDC | 0 VDC |
| 1792840618 | 617 Count | 383 Count | 264 Count | 0 VDC | 0 VDC |
| 1792838814 | 616 Count | 382 Count | 264 Count | 0 VDC | 0 VDC |
| 1792837010 | 615 Count | 382 Count | 264 Count | 0 VDC | 0 VDC |
| 1792835206 | 614 Count | 381 Count | 264 Count | 0 VDC | 0 VDC |
| 1792833403 | 613 Count | 381 Count | 264 Count | 0 VDC | 0 VDC |
| 1792831644 | 612 Count | 380 Count | 264 Count | 0 VDC | 0 VDC |
| 1792829840 | 610 Count | 379 Count | 263 Count | 0 VDC | 0 VDC |
| 1792828036 | 604 Count | 373 Count | 258 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)