This is the latest recevied telemetry packets stored in our database for station/object DL7AD-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1746386837 | 4152 | 8 | 125 | 1382 | 8019 |
| 1746386827 | 3768 | 0 | 120 | 1362 | 8036 |
| 1746386817 | 3832 | 0 | 126 | 1353 | 8025 |
| 1746386807 | 4018 | 0 | 0 | 1353 | 8021 |
| 1746386146 | 4168 | 1 | 131 | 1369 | 8018 |
| 1746386136 | 3760 | 0 | 122 | 1374 | 8033 |
| 1746386126 | 3824 | 0 | 127 | 1339 | 8025 |
| 1746385444 | 3747 | 0 | 119 | 1308 | 8034 |
| 1746385424 | 3998 | 0 | 0 | 1362 | 8022 |
| 1746384762 | 4088 | 0 | 128 | 1207 | 8022 |
| 1746384752 | 3728 | 0 | 123 | 1206 | 8025 |
| 1746384732 | 4010 | 0 | 0 | 1364 | 8022 |
| 1746384061 | 3960 | 8 | 114 | 1399 | 8021 |
| 1746384041 | 4017 | 0 | 0 | 1371 | 8022 |
| 1746383206 | 4064 | 0 | 127 | 1195 | 8022 |
| 1746383196 | 4040 | 8 | 117 | 1405 | 8020 |
| 1746383186 | 3784 | 0 | 120 | 1294 | 8036 |
| 1746383176 | 3864 | 0 | 129 | 1355 | 8022 |
| 1746382514 | 4112 | 8 | 119 | 1402 | 8020 |
| 1746382504 | 3776 | 0 | 121 | 1338 | 8035 |
| 1746382495 | 3848 | 0 | 128 | 1350 | 8022 |
| 1746381843 | 4040 | 0 | 130 | 1200 | 8023 |
| 1746381833 | 4144 | 8 | 121 | 1390 | 8020 |
| 1746381823 | 3768 | 0 | 121 | 1356 | 8033 |
| 1746381803 | 3999 | 0 | 0 | 1321 | 8021 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)