This is the latest recevied telemetry packets stored in our database for station/object DL7AD-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1749327278 | 3992 | 8 | 224 | 1481 | 7995 |
| 1749327200 | 3984 | 8 | 228 | 1482 | 7995 |
| 1749327122 | 3984 | 8 | 224 | 1483 | 7995 |
| 1749327044 | 3976 | 8 | 224 | 1484 | 7995 |
| 1749326966 | 3968 | 8 | 224 | 1485 | 7995 |
| 1749326888 | 3960 | 8 | 223 | 1485 | 7994 |
| 1749326810 | 3952 | 8 | 224 | 1487 | 7994 |
| 1749326732 | 3944 | 8 | 214 | 1489 | 7994 |
| 1749326654 | 3936 | 8 | 222 | 1488 | 7994 |
| 1749326576 | 3928 | 8 | 226 | 1489 | 7995 |
| 1749326498 | 3920 | 8 | 215 | 1491 | 7994 |
| 1749326420 | 3912 | 8 | 210 | 1491 | 7994 |
| 1749326342 | 3904 | 8 | 221 | 1493 | 7995 |
| 1749326264 | 3896 | 8 | 221 | 1493 | 7994 |
| 1749326186 | 3888 | 8 | 220 | 1495 | 7993 |
| 1749326108 | 3888 | 8 | 220 | 1496 | 7994 |
| 1749326030 | 3880 | 8 | 221 | 1498 | 7994 |
| 1749325952 | 3872 | 8 | 224 | 1498 | 7994 |
| 1749325874 | 3864 | 8 | 222 | 1499 | 7994 |
| 1749325796 | 3856 | 8 | 220 | 1499 | 7994 |
| 1749325718 | 3848 | 8 | 220 | 1498 | 7994 |
| 1749325640 | 3848 | 8 | 221 | 1498 | 7994 |
| 1749325562 | 3840 | 8 | 222 | 1496 | 7993 |
| 1749325484 | 3832 | 8 | 225 | 1497 | 7994 |
| 1749325406 | 3824 | 8 | 222 | 1499 | 7993 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)