This is the latest recevied telemetry packets stored in our database for station/object SR2GKG-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792899075 | 65 Count | 141 Count | 64 Count | 4.29 VDC | 0 VDC |
| 1792897274 | 31 Count | 68 Count | 31 Count | 4.3 VDC | 0 VDC |
| 1792895473 | 520 Count | 1040 Count | 472 Count | 4.3 VDC | 0 VDC |
| 1792893673 | 486 Count | 969 Count | 439 Count | 4.29 VDC | 0 VDC |
| 1792891872 | 453 Count | 900 Count | 407 Count | 4.29 VDC | 0 VDC |
| 1792890071 | 411 Count | 824 Count | 366 Count | 4.31 VDC | 0 VDC |
| 1792888270 | 384 Count | 760 Count | 340 Count | 4.3 VDC | 0 VDC |
| 1792886470 | 352 Count | 691 Count | 309 Count | 4.3 VDC | 0 VDC |
| 1792884669 | 326 Count | 625 Count | 284 Count | 4.27 VDC | 0 VDC |
| 1792882868 | 291 Count | 553 Count | 250 Count | 4.29 VDC | 0 VDC |
| 1792881068 | 259 Count | 482 Count | 219 Count | 4.3 VDC | 0 VDC |
| 1792880482 | 254 Count | 481 Count | 219 Count | 4.29 VDC | 0 VDC |
| 1792878681 | 215 Count | 401 Count | 181 Count | 4.29 VDC | 0 VDC |
| 1792876881 | 180 Count | 325 Count | 147 Count | 4.29 VDC | 0 VDC |
| 1792876279 | 174 Count | 324 Count | 146 Count | 4.29 VDC | 0 VDC |
| 1792874910 | 169 Count | 324 Count | 146 Count | 4.28 VDC | 0 VDC |
| 1792873109 | 117 Count | 228 Count | 95 Count | 4.3 VDC | 0 VDC |
| 1792871308 | 74 Count | 125 Count | 54 Count | 4.29 VDC | 0 VDC |
| 1792870393 | 69 Count | 124 Count | 54 Count | 4.28 VDC | 0 VDC |
| 1792868593 | 64 Count | 123 Count | 54 Count | 4.29 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)