This is the latest recevied telemetry packets stored in our database for station/object SP1HSP-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789689350 | 73 Count | 164 Count | 68 Count | 4.15 VDC | 0.14 VDC |
| 1789687547 | 63 Count | 144 Count | 59 Count | 4.15 VDC | 0.14 VDC |
| 1789685744 | 50 Count | 116 Count | 47 Count | 4.15 VDC | 0.14 VDC |
| 1789683978 | 34 Count | 84 Count | 32 Count | 4.15 VDC | 0.14 VDC |
| 1789682175 | 20 Count | 51 Count | 19 Count | 4.15 VDC | 0.14 VDC |
| 1789680372 | 9 Count | 24 Count | 9 Count | 4.15 VDC | 0.14 VDC |
| 1789678569 | 405 Count | 1023 Count | 383 Count | 4.15 VDC | 0.14 VDC |
| 1789676766 | 395 Count | 987 Count | 374 Count | 4.15 VDC | 0.14 VDC |
| 1789674963 | 386 Count | 957 Count | 366 Count | 4.15 VDC | 0.14 VDC |
| 1789673160 | 376 Count | 937 Count | 357 Count | 4.15 VDC | 0.14 VDC |
| 1789671357 | 364 Count | 915 Count | 346 Count | 4.15 VDC | 0.14 VDC |
| 1789669554 | 348 Count | 886 Count | 331 Count | 4.15 VDC | 0.14 VDC |
| 1789667751 | 331 Count | 855 Count | 315 Count | 4.15 VDC | 0.14 VDC |
| 1789665948 | 305 Count | 805 Count | 290 Count | 4.15 VDC | 0.14 VDC |
| 1789664145 | 281 Count | 715 Count | 267 Count | 4.15 VDC | 0.14 VDC |
| 1789662379 | 268 Count | 685 Count | 255 Count | 4.15 VDC | 0.14 VDC |
| 1789660576 | 254 Count | 648 Count | 242 Count | 4.15 VDC | 0.14 VDC |
| 1789658773 | 236 Count | 612 Count | 225 Count | 4.15 VDC | 0.14 VDC |
| 1789656970 | 217 Count | 570 Count | 207 Count | 4.15 VDC | 0.14 VDC |
| 1789655167 | 200 Count | 513 Count | 191 Count | 4.15 VDC | 0.14 VDC |
| 1789653364 | 182 Count | 451 Count | 174 Count | 4.15 VDC | 0.14 VDC |
| 1789651560 | 164 Count | 412 Count | 157 Count | 4.15 VDC | 0.14 VDC |
| 1789649757 | 137 Count | 332 Count | 131 Count | 4.15 VDC | 0.14 VDC |
| 1789647954 | 112 Count | 272 Count | 107 Count | 4.16 VDC | 0.14 VDC |
| 1789646151 | 93 Count | 217 Count | 89 Count | 4.16 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)