This is the latest recevied telemetry packets stored in our database for station/object F4IZM-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1793622392 | 909 Count | 698 Count | 647 Count | 0 VDC | 0 VDC |
| 1793620587 | 906 Count | 696 Count | 645 Count | 0 VDC | 0 VDC |
| 1793618782 | 903 Count | 694 Count | 643 Count | 0 VDC | 0 VDC |
| 1793616977 | 900 Count | 692 Count | 641 Count | 0 VDC | 0 VDC |
| 1793615172 | 897 Count | 690 Count | 639 Count | 0 VDC | 0 VDC |
| 1793613367 | 894 Count | 688 Count | 637 Count | 0 VDC | 0 VDC |
| 1793611562 | 890 Count | 685 Count | 634 Count | 0 VDC | 0 VDC |
| 1793609757 | 887 Count | 683 Count | 632 Count | 0 VDC | 0 VDC |
| 1793607952 | 884 Count | 681 Count | 630 Count | 0 VDC | 0 VDC |
| 1793606147 | 881 Count | 679 Count | 628 Count | 0 VDC | 0 VDC |
| 1793604342 | 877 Count | 676 Count | 625 Count | 0 VDC | 0 VDC |
| 1793602537 | 872 Count | 672 Count | 621 Count | 0 VDC | 0 VDC |
| 1793600732 | 867 Count | 668 Count | 617 Count | 0 VDC | 0 VDC |
| 1793598928 | 863 Count | 665 Count | 614 Count | 0 VDC | 0 VDC |
| 1793597123 | 860 Count | 663 Count | 612 Count | 0 VDC | 0 VDC |
| 1793595318 | 854 Count | 658 Count | 607 Count | 0 VDC | 0 VDC |
| 1793593513 | 850 Count | 655 Count | 604 Count | 0 VDC | 0 VDC |
| 1793591708 | 847 Count | 653 Count | 602 Count | 0 VDC | 0 VDC |
| 1793589903 | 843 Count | 650 Count | 599 Count | 0 VDC | 0 VDC |
| 1793588098 | 839 Count | 647 Count | 596 Count | 0 VDC | 0 VDC |
| 1793586293 | 836 Count | 645 Count | 594 Count | 0 VDC | 0 VDC |
| 1793584488 | 833 Count | 643 Count | 592 Count | 0 VDC | 0 VDC |
| 1793582684 | 830 Count | 641 Count | 590 Count | 0 VDC | 0 VDC |
| 1793580879 | 827 Count | 639 Count | 588 Count | 0 VDC | 0 VDC |
| 1793579074 | 824 Count | 637 Count | 586 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)