This is the latest recevied telemetry packets stored in our database for station/object SQ7AYZ-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1793641176 | 798 Count | 291 Count | 212 Count | 0 VDC | 0 VDC |
| 1793639376 | 796 Count | 290 Count | 211 Count | 0 VDC | 0 VDC |
| 1793637575 | 795 Count | 290 Count | 211 Count | 0 VDC | 0 VDC |
| 1793635774 | 793 Count | 289 Count | 210 Count | 0 VDC | 0 VDC |
| 1793633974 | 791 Count | 288 Count | 209 Count | 0 VDC | 0 VDC |
| 1793632173 | 790 Count | 288 Count | 209 Count | 0 VDC | 0 VDC |
| 1793630372 | 789 Count | 288 Count | 209 Count | 0 VDC | 0 VDC |
| 1793628572 | 787 Count | 287 Count | 208 Count | 0 VDC | 0 VDC |
| 1793626771 | 785 Count | 286 Count | 207 Count | 0 VDC | 0 VDC |
| 1793624970 | 784 Count | 286 Count | 207 Count | 0 VDC | 0 VDC |
| 1793623170 | 783 Count | 286 Count | 207 Count | 0 VDC | 0 VDC |
| 1793621372 | 782 Count | 286 Count | 207 Count | 0 VDC | 0 VDC |
| 1793619571 | 780 Count | 285 Count | 206 Count | 0 VDC | 0 VDC |
| 1793617770 | 778 Count | 284 Count | 205 Count | 0 VDC | 0 VDC |
| 1793615970 | 776 Count | 283 Count | 204 Count | 0 VDC | 0 VDC |
| 1793614169 | 775 Count | 283 Count | 204 Count | 0 VDC | 0 VDC |
| 1793612368 | 771 Count | 280 Count | 201 Count | 0 VDC | 0 VDC |
| 1793610568 | 770 Count | 280 Count | 201 Count | 0 VDC | 0 VDC |
| 1793608767 | 769 Count | 280 Count | 201 Count | 0 VDC | 0 VDC |
| 1793606966 | 768 Count | 280 Count | 201 Count | 0 VDC | 0 VDC |
| 1793605166 | 767 Count | 280 Count | 201 Count | 0 VDC | 0 VDC |
| 1793603365 | 766 Count | 280 Count | 201 Count | 0 VDC | 0 VDC |
| 1793601564 | 765 Count | 280 Count | 201 Count | 0 VDC | 0 VDC |
| 1793599771 | 764 Count | 280 Count | 201 Count | 0 VDC | 0 VDC |
| 1793597970 | 762 Count | 279 Count | 200 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)