This is the latest recevied telemetry packets stored in our database for station/object KK7LLM-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1785288025 | 447 Volts | 661 Deg.F | 266 | 0 | 0 |
| 1785288016 | 447 Volts | 661 Deg.F | 270 | 0 | 0 |
| 1785288008 | 442 Volts | 660 Deg.F | 254 | 0 | 0 |
| 1785287915 | 444 Volts | 660 Deg.F | 274 | 0 | 0 |
| 1785287784 | 445 Volts | 658 Deg.F | 274 | 0 | 0 |
| 1785287693 | 444 Volts | 656 Deg.F | 250 | 0 | 0 |
| 1785287684 | 443 Volts | 655 Deg.F | 274 | 0 | 0 |
| 1785287668 | 445 Volts | 655 Deg.F | 272 | 0 | 0 |
| 1785287660 | 437 Volts | 654 Deg.F | 278 | 0 | 0 |
| 1785287610 | 441 Volts | 653 Deg.F | 265 | 0 | 0 |
| 1785287568 | 439 Volts | 653 Deg.F | 287 | 0 | 0 |
| 1785285923 | 443 Volts | 665 Deg.F | 264 | 0 | 0 |
| 1785285907 | 443 Volts | 665 Deg.F | 259 | 0 | 0 |
| 1785285733 | 445 Volts | 665 Deg.F | 255 | 0 | 0 |
| 1785285617 | 451 Volts | 664 Deg.F | 267 | 0 | 0 |
| 1785285594 | 451 Volts | 664 Deg.F | 276 | 0 | 0 |
| 1785285467 | 454 Volts | 663 Deg.F | 293 | 0 | 0 |
| 1785285272 | 456 Volts | 662 Deg.F | 278 | 0 | 0 |
| 1785076328 | 461 Volts | 612 Deg.F | 334 | 0 | 0 |
| 1785076315 | 462 Volts | 612 Deg.F | 332 | 0 | 0 |
| 1785076289 | 462 Volts | 612 Deg.F | 340 | 0 | 0 |
| 1785076030 | 466 Volts | 609 Deg.F | 346 | 0 | 0 |
| 1785022508 | 444 Volts | 670 Deg.F | 262 | 0 | 0 |
| 1785022493 | 443 Volts | 670 Deg.F | 267 | 0 | 0 |
| 1785022172 | 441 Volts | 667 Deg.F | 255 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 1, 0
Temp: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)