This is the latest recevied telemetry packets stored in our database for station/object SQ7PKP-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785393822 | 350 Count | 949 Count | 48 Count | 0 VDC | 0 VDC |
| 1785393221 | 349 Count | 946 Count | 48 Count | 0 VDC | 0 VDC |
| 1785392620 | 348 Count | 945 Count | 48 Count | 0 VDC | 0 VDC |
| 1785392020 | 347 Count | 944 Count | 48 Count | 0 VDC | 0 VDC |
| 1785391419 | 346 Count | 943 Count | 48 Count | 0 VDC | 0 VDC |
| 1785390818 | 345 Count | 940 Count | 48 Count | 0 VDC | 0 VDC |
| 1785390217 | 344 Count | 939 Count | 48 Count | 0 VDC | 0 VDC |
| 1785389616 | 343 Count | 936 Count | 48 Count | 0 VDC | 0 VDC |
| 1785367447 | 260 Count | 503 Count | 10 Count | 0 VDC | 0 VDC |
| 1785366846 | 259 Count | 498 Count | 10 Count | 0 VDC | 0 VDC |
| 1785366245 | 258 Count | 490 Count | 10 Count | 0 VDC | 0 VDC |
| 1785365645 | 257 Count | 483 Count | 10 Count | 0 VDC | 0 VDC |
| 1785365044 | 256 Count | 478 Count | 10 Count | 0 VDC | 0 VDC |
| 1785364443 | 255 Count | 474 Count | 10 Count | 0 VDC | 0 VDC |
| 1785363842 | 254 Count | 471 Count | 10 Count | 0 VDC | 0 VDC |
| 1785363241 | 253 Count | 464 Count | 10 Count | 0 VDC | 0 VDC |
| 1785362640 | 252 Count | 458 Count | 10 Count | 0 VDC | 0 VDC |
| 1785362040 | 251 Count | 457 Count | 10 Count | 0 VDC | 0 VDC |
| 1785361439 | 250 Count | 454 Count | 10 Count | 0 VDC | 0 VDC |
| 1785360838 | 249 Count | 451 Count | 10 Count | 0 VDC | 0 VDC |
| 1785360237 | 248 Count | 449 Count | 10 Count | 0 VDC | 0 VDC |
| 1785359637 | 247 Count | 447 Count | 10 Count | 0 VDC | 0 VDC |
| 1785359036 | 246 Count | 446 Count | 10 Count | 0 VDC | 0 VDC |
| 1785358435 | 245 Count | 445 Count | 10 Count | 0 VDC | 0 VDC |
| 1785357834 | 244 Count | 444 Count | 10 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)