This is the latest recevied telemetry packets stored in our database for station/object SN9GK-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792865570 | 0 Count | 190 Count | 0 Count | 0 VDC | 0 VDC |
| 1792863770 | 8 Count | 1022 Count | 0 Count | 0 VDC | 0 VDC |
| 1792861969 | 7 Count | 921 Count | 0 Count | 0 VDC | 0 VDC |
| 1792860168 | 6 Count | 835 Count | 0 Count | 0 VDC | 0 VDC |
| 1792858367 | 5 Count | 726 Count | 0 Count | 0 VDC | 0 VDC |
| 1792856566 | 4 Count | 585 Count | 0 Count | 0 VDC | 0 VDC |
| 1792854766 | 3 Count | 430 Count | 0 Count | 0 VDC | 0 VDC |
| 1792852965 | 2 Count | 289 Count | 0 Count | 0 VDC | 0 VDC |
| 1792851164 | 1 Count | 184 Count | 0 Count | 0 VDC | 0 VDC |
| 1792849363 | 0 Count | 90 Count | 0 Count | 0 VDC | 0 VDC |
| 1792847562 | 9 Count | 1102 Count | 0 Count | 0 VDC | 0 VDC |
| 1792845762 | 8 Count | 991 Count | 0 Count | 0 VDC | 0 VDC |
| 1792843970 | 7 Count | 882 Count | 0 Count | 0 VDC | 0 VDC |
| 1792842169 | 6 Count | 777 Count | 0 Count | 0 VDC | 0 VDC |
| 1792840368 | 5 Count | 660 Count | 0 Count | 0 VDC | 0 VDC |
| 1792838568 | 4 Count | 572 Count | 0 Count | 0 VDC | 0 VDC |
| 1792836767 | 3 Count | 470 Count | 0 Count | 0 VDC | 0 VDC |
| 1792834966 | 2 Count | 377 Count | 0 Count | 0 VDC | 0 VDC |
| 1792833165 | 1 Count | 261 Count | 0 Count | 0 VDC | 0 VDC |
| 1792831364 | 0 Count | 119 Count | 0 Count | 0 VDC | 0 VDC |
| 1792829564 | 7 Count | 1110 Count | 0 Count | 0 VDC | 0 VDC |
| 1792827763 | 6 Count | 997 Count | 0 Count | 0 VDC | 0 VDC |
| 1792825962 | 5 Count | 833 Count | 0 Count | 0 VDC | 0 VDC |
| 1792824161 | 4 Count | 714 Count | 0 Count | 0 VDC | 0 VDC |
| 1792822369 | 3 Count | 599 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)