This is the latest recevied telemetry packets stored in our database for station/object EA4AOJ-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Pressure* | Satellite* | HDOP* | Value5* |
|---|---|---|---|---|---|
| 1765958699 | 15 | 944 | 9 | 1 | 0 |
| 1765958682 | 15 | 944 | 11 | 1 | 0 |
| 1765958662 | 15 | 944 | 11 | 1 | 0 |
| 1765958648 | 15 | 944 | 11 | 1 | 0 |
| 1765958640 | 15 | 944 | 10 | 1 | 0 |
| 1765958630 | 15 | 944 | 11 | 1 | 0 |
| 1765958581 | 15 | 945 | 11 | 1 | 0 |
| 1765958547 | 15 | 945 | 10 | 1 | 0 |
| 1765958481 | 14 | 944 | 10 | 1 | 0 |
| 1765958450 | 14 | 943 | 11 | 1 | 0 |
| 1765958376 | 13 | 942 | 11 | 0 | 0 |
| 1765958362 | 13 | 942 | 11 | 0 | 0 |
| 1765958354 | 13 | 942 | 11 | 1 | 0 |
| 1765958346 | 13 | 941 | 11 | 0 | 0 |
| 1765958309 | 12 | 940 | 12 | 0 | 0 |
| 1765958289 | 12 | 940 | 12 | 0 | 0 |
| 1765958268 | 12 | 940 | 12 | 0 | 0 |
| 1765958216 | 12 | 939 | 12 | 0 | 0 |
| 1765957739 | 7 | 945 | 10 | 1 | 0 |
| 1765957710 | 7 | 945 | 10 | 1 | 0 |
| 1765957337 | 2 | 945 | 8 | 2 | 0 |
| 1765957328 | 2 | 945 | 8 | 2 | 0 |
| 1765957295 | 1 | 945 | 6 | 3 | 0 |
| 1765957272 | 1 | 945 | 6 | 3 | 0 |
| 1765910548 | 24 | 937 | 7 | 1 | 0 |
*Used Equation Coefficients:
Temp: 0, 1, 0
Pressure: 0, 1, 0
Satellite: 0, 1, 0
HDOP: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)