This is the latest recevied telemetry packets stored in our database for station/object KQ6DI-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | DC* | PC Board* | Ambient* | upper* | lower* |
|---|---|---|---|---|---|
| 1762140967 | 257 | 796 | 731 | 694 | 690 |
| 1762139165 | 257 | 798 | 732 | 716 | 714 |
| 1762137367 | 260 | 799 | 732 | 740 | 736 |
| 1762135566 | 260 | 800 | 733 | 770 | 764 |
| 1762133767 | 257 | 802 | 732 | 803 | 792 |
| 1762131964 | 260 | 802 | 732 | 845 | 824 |
| 1762130166 | 260 | 799 | 728 | 900 | 856 |
| 1762128364 | 265 | 797 | 727 | 940 | 878 |
| 1762126567 | 265 | 794 | 724 | 967 | 895 |
| 1762124764 | 317 | 789 | 722 | 995 | 914 |
| 1762122966 | 321 | 789 | 718 | 1014 | 924 |
| 1762121164 | 321 | 787 | 715 | 1024 | 928 |
| 1762119367 | 315 | 778 | 708 | 1015 | 917 |
| 1762117564 | 348 | 773 | 705 | 998 | 900 |
| 1762115767 | 340 | 770 | 700 | 987 | 886 |
| 1762113964 | 334 | 766 | 697 | 970 | 868 |
| 1762112167 | 330 | 761 | 692 | 942 | 844 |
| 1762110364 | 327 | 756 | 689 | 893 | 809 |
| 1762108568 | 317 | 753 | 686 | 834 | 762 |
| 1762106764 | 309 | 749 | 682 | 771 | 715 |
| 1762104967 | 304 | 744 | 680 | 689 | 652 |
| 1762103165 | 299 | 741 | 677 | 626 | 600 |
| 1762101367 | 298 | 737 | 674 | 570 | 555 |
| 1762099565 | 284 | 735 | 673 | 527 | 519 |
| 1762097767 | 257 | 733 | 673 | 491 | 492 |
*Used Equation Coefficients:
DC: 0, 1, 0
PC Board: 0, 1, 0
Ambient: 0, 1, 0
upper: 0, 1, 0
lower: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)