This is the latest recevied telemetry packets stored in our database for station/object SQ5LTL-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785391812 | 6 Count | 21 Count | 0 Count | 0 VDC | 0 VDC |
| 1785390014 | 5 Count | 19 Count | 0 Count | 0 VDC | 0 VDC |
| 1785388213 | 4 Count | 16 Count | 0 Count | 0 VDC | 0 VDC |
| 1785386413 | 3 Count | 9 Count | 0 Count | 0 VDC | 0 VDC |
| 1785384612 | 2 Count | 6 Count | 0 Count | 0 VDC | 0 VDC |
| 1785382812 | 1 Count | 3 Count | 0 Count | 0 VDC | 0 VDC |
| 1785381012 | 0 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1785379213 | 372 Count | 1000 Count | 12 Count | 0 VDC | 0 VDC |
| 1785377412 | 371 Count | 997 Count | 12 Count | 0 VDC | 0 VDC |
| 1785375612 | 370 Count | 994 Count | 12 Count | 0 VDC | 0 VDC |
| 1785373811 | 369 Count | 991 Count | 12 Count | 0 VDC | 0 VDC |
| 1785372011 | 368 Count | 989 Count | 12 Count | 0 VDC | 0 VDC |
| 1785370210 | 367 Count | 987 Count | 12 Count | 0 VDC | 0 VDC |
| 1785368413 | 366 Count | 985 Count | 12 Count | 0 VDC | 0 VDC |
| 1785366612 | 365 Count | 983 Count | 12 Count | 0 VDC | 0 VDC |
| 1785364811 | 364 Count | 981 Count | 12 Count | 0 VDC | 0 VDC |
| 1785363011 | 363 Count | 979 Count | 12 Count | 0 VDC | 0 VDC |
| 1785361211 | 362 Count | 977 Count | 12 Count | 0 VDC | 0 VDC |
| 1785359410 | 361 Count | 975 Count | 12 Count | 0 VDC | 0 VDC |
| 1785354011 | 358 Count | 964 Count | 12 Count | 0 VDC | 0 VDC |
| 1785352209 | 357 Count | 962 Count | 12 Count | 0 VDC | 0 VDC |
| 1785350411 | 356 Count | 960 Count | 12 Count | 0 VDC | 0 VDC |
| 1785346811 | 354 Count | 956 Count | 12 Count | 0 VDC | 0 VDC |
| 1785345010 | 353 Count | 954 Count | 12 Count | 0 VDC | 0 VDC |
| 1785343210 | 352 Count | 952 Count | 12 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)