This is the latest recevied telemetry packets stored in our database for station/object SP2MG-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1745177729 | 108 Count | 637 Count | 16 Count | 4.25 VDC | 0.14 VDC |
| 1745174155 | 108 Count | 637 Count | 16 Count | 4.34 VDC | 0.14 VDC |
| 1745170550 | 108 Count | 637 Count | 16 Count | 4.25 VDC | 0.14 VDC |
| 1745166946 | 108 Count | 637 Count | 16 Count | 4.27 VDC | 0.14 VDC |
| 1745163342 | 108 Count | 637 Count | 16 Count | 4.31 VDC | 0.14 VDC |
| 1745159737 | 108 Count | 637 Count | 16 Count | 4.26 VDC | 0.14 VDC |
| 1745156133 | 108 Count | 637 Count | 16 Count | 4.33 VDC | 0.14 VDC |
| 1745141398 | 108 Count | 637 Count | 16 Count | 4.32 VDC | 0.14 VDC |
| 1745137794 | 108 Count | 637 Count | 16 Count | 4.32 VDC | 0.14 VDC |
| 1745134189 | 108 Count | 637 Count | 16 Count | 4.24 VDC | 0.14 VDC |
| 1745133840 | 108 Count | 637 Count | 16 Count | 4.26 VDC | 0.14 VDC |
| 1745132443 | 107 Count | 633 Count | 16 Count | 4.33 VDC | 0.14 VDC |
| 1745132391 | 106 Count | 633 Count | 16 Count | 4.27 VDC | 0.14 VDC |
| 1745113716 | 105 Count | 633 Count | 16 Count | 4.33 VDC | 0.14 VDC |
| 1745113705 | 105 Count | 632 Count | 16 Count | 4.34 VDC | 0.14 VDC |
| 1745113694 | 105 Count | 638 Count | 16 Count | 4.32 VDC | 0.14 VDC |
| 1745110088 | 103 Count | 627 Count | 16 Count | 4.34 VDC | 0.14 VDC |
| 1745106483 | 101 Count | 616 Count | 16 Count | 4.33 VDC | 0.14 VDC |
| 1745102915 | 99 Count | 609 Count | 16 Count | 4.29 VDC | 0.14 VDC |
| 1745099309 | 97 Count | 601 Count | 16 Count | 4.3 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)