This is the latest recevied telemetry packets stored in our database for station/object SP3ZBY-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1793637745 | 116 Count | 102 Count | 97 Count | 4 VDC | 0 VDC |
| 1793635945 | 115 Count | 102 Count | 97 Count | 4 VDC | 0 VDC |
| 1793634144 | 111 Count | 99 Count | 94 Count | 4 VDC | 0 VDC |
| 1793632343 | 66 Count | 51 Count | 50 Count | 4 VDC | 0 VDC |
| 1793630542 | 65 Count | 51 Count | 50 Count | 4 VDC | 0 VDC |
| 1793607149 | 52 Count | 51 Count | 50 Count | 4 VDC | 0 VDC |
| 1793605349 | 51 Count | 51 Count | 50 Count | 4 VDC | 0 VDC |
| 1793603548 | 47 Count | 48 Count | 47 Count | 4 VDC | 0 VDC |
| 1793601747 | 1014 Count | 1011 Count | 909 Count | 4 VDC | 0 VDC |
| 1793599946 | 990 Count | 987 Count | 886 Count | 4 VDC | 0 VDC |
| 1793598145 | 965 Count | 961 Count | 862 Count | 4 VDC | 0 VDC |
| 1793596344 | 939 Count | 933 Count | 837 Count | 4 VDC | 0 VDC |
| 1793594544 | 907 Count | 900 Count | 806 Count | 3.99 VDC | 0 VDC |
| 1793592743 | 893 Count | 884 Count | 793 Count | 4 VDC | 0 VDC |
| 1793590942 | 876 Count | 864 Count | 777 Count | 4 VDC | 0 VDC |
| 1793589141 | 859 Count | 845 Count | 761 Count | 4 VDC | 0 VDC |
| 1793587340 | 845 Count | 828 Count | 748 Count | 4 VDC | 0 VDC |
| 1793585550 | 826 Count | 809 Count | 730 Count | 3.98 VDC | 0 VDC |
| 1793583749 | 812 Count | 795 Count | 717 Count | 3.99 VDC | 0 VDC |
| 1793581948 | 790 Count | 773 Count | 696 Count | 3.99 VDC | 0 VDC |
| 1793580146 | 770 Count | 753 Count | 677 Count | 4 VDC | 0 VDC |
| 1793578345 | 756 Count | 740 Count | 664 Count | 4 VDC | 0 VDC |
| 1793576545 | 733 Count | 715 Count | 642 Count | 4 VDC | 0 VDC |
| 1793574744 | 720 Count | 701 Count | 630 Count | 4 VDC | 0 VDC |
| 1793572943 | 706 Count | 685 Count | 617 Count | 4 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)