This is the latest recevied telemetry packets stored in our database for station/object SV1SSF-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1762085152 | 16 Count | 115 Count | 0 Count | 4.62 VDC | 0 VDC |
| 1762083166 | 15 Count | 105 Count | 0 Count | 4.62 VDC | 0 VDC |
| 1762081185 | 14 Count | 95 Count | 0 Count | 4.62 VDC | 0 VDC |
| 1762077215 | 12 Count | 78 Count | 0 Count | 4.63 VDC | 0 VDC |
| 1762074129 | 6 Count | 64 Count | 0 Count | 4.61 VDC | 0 VDC |
| 1762072146 | 5 Count | 55 Count | 0 Count | 4.61 VDC | 0 VDC |
| 1762070159 | 4 Count | 45 Count | 0 Count | 4.6 VDC | 0 VDC |
| 1762068175 | 3 Count | 36 Count | 0 Count | 4.6 VDC | 0 VDC |
| 1762066194 | 2 Count | 26 Count | 0 Count | 4.6 VDC | 0 VDC |
| 1762064211 | 1 Count | 18 Count | 0 Count | 4.6 VDC | 0 VDC |
| 1762060240 | 121 Count | 1002 Count | 0 Count | 4.6 VDC | 0 VDC |
| 1762058260 | 119 Count | 993 Count | 0 Count | 4.6 VDC | 0 VDC |
| 1762056276 | 118 Count | 985 Count | 0 Count | 4.6 VDC | 0 VDC |
| 1762054292 | 117 Count | 975 Count | 0 Count | 4.6 VDC | 0 VDC |
| 1762052308 | 116 Count | 964 Count | 0 Count | 4.54 VDC | 0 VDC |
| 1762050325 | 115 Count | 955 Count | 0 Count | 4.55 VDC | 0 VDC |
| 1762048341 | 114 Count | 945 Count | 0 Count | 4.6 VDC | 0 VDC |
| 1762044374 | 112 Count | 930 Count | 0 Count | 4.55 VDC | 0 VDC |
| 1762042390 | 111 Count | 922 Count | 0 Count | 4.6 VDC | 0 VDC |
| 1762040403 | 110 Count | 912 Count | 0 Count | 4.59 VDC | 0 VDC |
| 1762038422 | 109 Count | 904 Count | 0 Count | 4.59 VDC | 0 VDC |
| 1762036436 | 108 Count | 896 Count | 0 Count | 4.57 VDC | 0 VDC |
| 1762034455 | 107 Count | 885 Count | 0 Count | 4.59 VDC | 0 VDC |
| 1762032468 | 106 Count | 876 Count | 0 Count | 4.59 VDC | 0 VDC |
| 1762030488 | 105 Count | 866 Count | 0 Count | 4.59 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)