This is the latest recevied telemetry packets stored in our database for station/object SP7KGO-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789690803 | 811 Count | 418 Count | 307 Count | 3.83 VDC | 0.08 VDC |
| 1789689001 | 806 Count | 411 Count | 304 Count | 3.85 VDC | 0.08 VDC |
| 1789687200 | 798 Count | 404 Count | 298 Count | 3.83 VDC | 0.08 VDC |
| 1789685399 | 792 Count | 396 Count | 294 Count | 3.85 VDC | 0.08 VDC |
| 1789683597 | 790 Count | 395 Count | 294 Count | 3.83 VDC | 0.08 VDC |
| 1789681796 | 787 Count | 393 Count | 292 Count | 3.84 VDC | 0.08 VDC |
| 1789679994 | 784 Count | 393 Count | 292 Count | 3.85 VDC | 0.08 VDC |
| 1789678193 | 782 Count | 393 Count | 292 Count | 3.85 VDC | 0.08 VDC |
| 1789676391 | 780 Count | 392 Count | 292 Count | 3.88 VDC | 0.08 VDC |
| 1789674590 | 778 Count | 392 Count | 292 Count | 3.88 VDC | 0.08 VDC |
| 1789672788 | 776 Count | 391 Count | 292 Count | 3.86 VDC | 0.08 VDC |
| 1789670987 | 774 Count | 391 Count | 292 Count | 3.83 VDC | 0.08 VDC |
| 1789669437 | 773 Count | 391 Count | 292 Count | 3.85 VDC | 0.08 VDC |
| 1789667636 | 771 Count | 391 Count | 292 Count | 3.85 VDC | 0.08 VDC |
| 1789665834 | 769 Count | 391 Count | 292 Count | 3.83 VDC | 0.08 VDC |
| 1789664033 | 767 Count | 391 Count | 292 Count | 3.87 VDC | 0.08 VDC |
| 1789662232 | 765 Count | 391 Count | 292 Count | 3.85 VDC | 0.08 VDC |
| 1789660430 | 763 Count | 391 Count | 292 Count | 3.86 VDC | 0.08 VDC |
| 1789658629 | 762 Count | 391 Count | 292 Count | 3.83 VDC | 0.08 VDC |
| 1789656846 | 760 Count | 391 Count | 292 Count | 3.87 VDC | 0.08 VDC |
| 1789655044 | 758 Count | 391 Count | 292 Count | 3.85 VDC | 0.08 VDC |
| 1789653243 | 756 Count | 391 Count | 292 Count | 3.83 VDC | 0.08 VDC |
| 1789651441 | 754 Count | 391 Count | 292 Count | 3.87 VDC | 0.08 VDC |
| 1789649640 | 752 Count | 391 Count | 292 Count | 3.87 VDC | 0.08 VDC |
| 1789647838 | 750 Count | 391 Count | 292 Count | 3.83 VDC | 0.08 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)