This is the latest recevied telemetry packets stored in our database for station/object SP2KFL-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792886045 | 86 Count | 345 Count | 78 Count | 4.1 VDC | 0 VDC |
| 1792884244 | 69 Count | 282 Count | 62 Count | 4.07 VDC | 0 VDC |
| 1792882443 | 53 Count | 219 Count | 47 Count | 4.07 VDC | 0 VDC |
| 1792880651 | 32 Count | 143 Count | 31 Count | 4.09 VDC | 0 VDC |
| 1792878850 | 16 Count | 72 Count | 16 Count | 4.09 VDC | 0 VDC |
| 1792877050 | 240 Count | 1020 Count | 225 Count | 4.07 VDC | 0 VDC |
| 1792875249 | 221 Count | 941 Count | 207 Count | 4.09 VDC | 0 VDC |
| 1792873448 | 206 Count | 870 Count | 193 Count | 4.08 VDC | 0 VDC |
| 1792871647 | 197 Count | 830 Count | 185 Count | 4.06 VDC | 0 VDC |
| 1792869847 | 177 Count | 746 Count | 166 Count | 4.11 VDC | 0 VDC |
| 1792868046 | 156 Count | 654 Count | 146 Count | 4.07 VDC | 0 VDC |
| 1792866245 | 132 Count | 550 Count | 123 Count | 4.1 VDC | 0 VDC |
| 1792864445 | 109 Count | 448 Count | 101 Count | 4.05 VDC | 0 VDC |
| 1792862644 | 88 Count | 362 Count | 81 Count | 4.09 VDC | 0 VDC |
| 1792860843 | 60 Count | 251 Count | 54 Count | 4.07 VDC | 0 VDC |
| 1792859051 | 41 Count | 166 Count | 40 Count | 4.09 VDC | 0 VDC |
| 1792857250 | 17 Count | 74 Count | 17 Count | 4.07 VDC | 0 VDC |
| 1792855449 | 319 Count | 1047 Count | 302 Count | 4.08 VDC | 0 VDC |
| 1792853648 | 303 Count | 984 Count | 287 Count | 4.09 VDC | 0 VDC |
| 1792851848 | 288 Count | 925 Count | 273 Count | 4.07 VDC | 0 VDC |
| 1792850047 | 269 Count | 856 Count | 255 Count | 4.1 VDC | 0 VDC |
| 1792848246 | 256 Count | 799 Count | 243 Count | 4.07 VDC | 0 VDC |
| 1792846446 | 232 Count | 724 Count | 220 Count | 4.09 VDC | 0 VDC |
| 1792844645 | 195 Count | 624 Count | 184 Count | 4.07 VDC | 0 VDC |
| 1792842844 | 168 Count | 543 Count | 158 Count | 4.09 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)