This is the latest recevied telemetry packets stored in our database for station/object SK3VJ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785397347 | 66 Count | 254 Count | 58 Count | 0 VDC | 0 VDC |
| 1785395544 | 53 Count | 187 Count | 46 Count | 0 VDC | 0 VDC |
| 1785393741 | 43 Count | 126 Count | 37 Count | 0 VDC | 0 VDC |
| 1785391938 | 29 Count | 87 Count | 24 Count | 0 VDC | 0 VDC |
| 1785390169 | 14 Count | 46 Count | 14 Count | 0 VDC | 0 VDC |
| 1785388366 | 242 Count | 1017 Count | 211 Count | 0 VDC | 0 VDC |
| 1785386563 | 230 Count | 972 Count | 200 Count | 0 VDC | 0 VDC |
| 1785384760 | 217 Count | 919 Count | 188 Count | 0 VDC | 0 VDC |
| 1785382957 | 204 Count | 876 Count | 176 Count | 0 VDC | 0 VDC |
| 1785381154 | 191 Count | 826 Count | 164 Count | 0 VDC | 0 VDC |
| 1785379351 | 180 Count | 785 Count | 154 Count | 0 VDC | 0 VDC |
| 1785377548 | 169 Count | 747 Count | 144 Count | 0 VDC | 0 VDC |
| 1785375745 | 157 Count | 707 Count | 133 Count | 0 VDC | 0 VDC |
| 1785373942 | 147 Count | 667 Count | 124 Count | 0 VDC | 0 VDC |
| 1785372139 | 138 Count | 632 Count | 116 Count | 0 VDC | 0 VDC |
| 1785370336 | 128 Count | 589 Count | 107 Count | 0 VDC | 0 VDC |
| 1785368566 | 115 Count | 550 Count | 99 Count | 0 VDC | 0 VDC |
| 1785366763 | 106 Count | 513 Count | 91 Count | 0 VDC | 0 VDC |
| 1785364960 | 100 Count | 474 Count | 86 Count | 0 VDC | 0 VDC |
| 1785363157 | 91 Count | 437 Count | 78 Count | 0 VDC | 0 VDC |
| 1785361354 | 82 Count | 388 Count | 70 Count | 0 VDC | 0 VDC |
| 1785359551 | 71 Count | 347 Count | 60 Count | 0 VDC | 0 VDC |
| 1785357748 | 62 Count | 306 Count | 52 Count | 0 VDC | 0 VDC |
| 1785355945 | 54 Count | 263 Count | 45 Count | 0 VDC | 0 VDC |
| 1785354142 | 47 Count | 220 Count | 39 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)