This is the latest recevied telemetry packets stored in our database for station/object F4IZM-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1781408188 | 111 Count | 489 Count | 81 Count | 0 VDC | 0 VDC |
| 1781406383 | 108 Count | 458 Count | 79 Count | 0 VDC | 0 VDC |
| 1781404578 | 105 Count | 440 Count | 77 Count | 0 VDC | 0 VDC |
| 1781402773 | 102 Count | 424 Count | 75 Count | 0 VDC | 0 VDC |
| 1781400968 | 99 Count | 404 Count | 73 Count | 0 VDC | 0 VDC |
| 1781399163 | 96 Count | 385 Count | 71 Count | 0 VDC | 0 VDC |
| 1781397358 | 93 Count | 368 Count | 69 Count | 0 VDC | 0 VDC |
| 1781395553 | 90 Count | 349 Count | 67 Count | 0 VDC | 0 VDC |
| 1781393748 | 87 Count | 333 Count | 65 Count | 0 VDC | 0 VDC |
| 1781391943 | 84 Count | 316 Count | 63 Count | 0 VDC | 0 VDC |
| 1781390138 | 81 Count | 298 Count | 61 Count | 0 VDC | 0 VDC |
| 1781388333 | 73 Count | 280 Count | 54 Count | 0 VDC | 0 VDC |
| 1781386528 | 66 Count | 259 Count | 48 Count | 0 VDC | 0 VDC |
| 1781384723 | 63 Count | 242 Count | 46 Count | 0 VDC | 0 VDC |
| 1781382918 | 60 Count | 227 Count | 44 Count | 0 VDC | 0 VDC |
| 1781381113 | 57 Count | 212 Count | 42 Count | 0 VDC | 0 VDC |
| 1781379308 | 54 Count | 194 Count | 40 Count | 0 VDC | 0 VDC |
| 1781377503 | 51 Count | 177 Count | 38 Count | 0 VDC | 0 VDC |
| 1781375698 | 48 Count | 162 Count | 36 Count | 0 VDC | 0 VDC |
| 1781373893 | 45 Count | 147 Count | 34 Count | 0 VDC | 0 VDC |
| 1781372088 | 42 Count | 134 Count | 32 Count | 0 VDC | 0 VDC |
| 1781370283 | 39 Count | 121 Count | 30 Count | 0 VDC | 0 VDC |
| 1781368477 | 30 Count | 103 Count | 22 Count | 0 VDC | 0 VDC |
| 1781366673 | 23 Count | 89 Count | 16 Count | 0 VDC | 0 VDC |
| 1781364868 | 20 Count | 77 Count | 14 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)