This is the latest recevied telemetry packets stored in our database for station/object WB0BBE-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 05/28/2025 6:24:13 AM+00:00 | 425 | 596 | 0 | 0 | 0 |
| 05/28/2025 6:09:18 AM+00:00 | 425 | 597 | 0 | 0 | 0 |
| 05/28/2025 5:39:29 AM+00:00 | 425 | 598 | 0 | 0 | 0 |
| 05/28/2025 5:24:34 AM+00:00 | 425 | 598 | 0 | 0 | 0 |
| 05/28/2025 5:09:39 AM+00:00 | 425 | 599 | 0 | 0 | 0 |
| 05/28/2025 4:54:44 AM+00:00 | 425 | 599 | 0 | 0 | 0 |
| 05/28/2025 4:39:49 AM+00:00 | 425 | 600 | 0 | 0 | 0 |
| 05/28/2025 3:55:04 AM+00:00 | 424 | 603 | 0 | 0 | 0 |
| 05/28/2025 3:40:09 AM+00:00 | 425 | 602 | 0 | 0 | 0 |
| 05/28/2025 2:55:24 AM+00:00 | 424 | 605 | 0 | 0 | 0 |
| 05/28/2025 2:40:28 AM+00:00 | 425 | 605 | 0 | 0 | 0 |
| 05/28/2025 2:25:33 AM+00:00 | 425 | 606 | 0 | 0 | 0 |
| 05/28/2025 2:10:38 AM+00:00 | 424 | 606 | 0 | 0 | 0 |
| 05/27/2025 9:16:19 AM+00:00 | 425 | 584 | 0 | 0 | 0 |
| 05/27/2025 9:01:24 AM+00:00 | 425 | 585 | 0 | 0 | 0 |
| 05/27/2025 8:46:29 AM+00:00 | 424 | 585 | 0 | 0 | 0 |
| 05/27/2025 8:31:34 AM+00:00 | 425 | 585 | 0 | 0 | 0 |
| 05/27/2025 8:16:40 AM+00:00 | 425 | 586 | 0 | 0 | 0 |
| 05/27/2025 8:01:45 AM+00:00 | 425 | 587 | 0 | 0 | 0 |
| 05/27/2025 7:46:50 AM+00:00 | 425 | 588 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)