This is the latest recevied telemetry packets stored in our database for station/object WA6ODP-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1762169612 | 10.31 | 288.36 | 429 | 619 | 0 |
| 1762169173 | 10.31 | 290.12 | 429 | 622 | 0 |
| 1762167814 | 10.31 | 292.75 | 429 | 627 | 0 |
| 1762167374 | 10.28 | 292.75 | 429 | 628 | 0 |
| 1762166014 | 10.31 | 292.75 | 424 | 628 | 0 |
| 1762165573 | 10.34 | 291 | 429 | 626 | 0 |
| 1762164215 | 10.28 | 292.75 | 429 | 626 | 0 |
| 1762163774 | 10.31 | 293.63 | 429 | 627 | 0 |
| 1762162417 | 10.31 | 296.27 | 429 | 628 | 0 |
| 1762161973 | 10.28 | 296.27 | 435 | 628 | 0 |
| 1762160617 | 10.34 | 298.03 | 429 | 632 | 0 |
| 1762160174 | 10.31 | 298.91 | 429 | 632 | 0 |
| 1762158818 | 10.31 | 302.42 | 435 | 636 | 0 |
| 1762158373 | 10.31 | 303.3 | 435 | 637 | 0 |
| 1762157020 | 10.31 | 306.82 | 440 | 642 | 0 |
| 1762156574 | 10.31 | 309.46 | 440 | 643 | 0 |
| 1762155220 | 10.28 | 312.97 | 440 | 646 | 0 |
| 1762154773 | 10.28 | 313.85 | 440 | 647 | 0 |
| 1762153421 | 10.31 | 317.37 | 440 | 651 | 0 |
| 1762152974 | 10.31 | 318.25 | 440 | 653 | 0 |
| 1762151622 | 10.28 | 322.64 | 440 | 656 | 0 |
| 1762151173 | 10.28 | 322.64 | 440 | 658 | 0 |
| 1762149824 | 10.31 | 327.04 | 451 | 661 | 0 |
| 1762149374 | 10.31 | 328.79 | 451 | 662 | 0 |
| 1762148024 | 10.31 | 330.55 | 451 | 665 | 0 |
*Used Equation Coefficients:
Value1: 0, 0.0293, 0
Value2: 0, 0.879, -459.67
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)