This is the latest recevied telemetry packets stored in our database for station/object VK2TBL-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1793634389 | 549 Count | 533 Count | 455 Count | 4.25 VDC | 0.14 VDC |
| 1793632585 | 545 Count | 530 Count | 452 Count | 4.27 VDC | 0.14 VDC |
| 1793630782 | 541 Count | 527 Count | 449 Count | 4.24 VDC | 0.14 VDC |
| 1793629053 | 534 Count | 525 Count | 447 Count | 4.27 VDC | 0.14 VDC |
| 1793627250 | 530 Count | 522 Count | 444 Count | 4.29 VDC | 0.14 VDC |
| 1793625447 | 526 Count | 519 Count | 441 Count | 4.28 VDC | 0.14 VDC |
| 1793623644 | 523 Count | 517 Count | 439 Count | 4.24 VDC | 0.14 VDC |
| 1793621841 | 519 Count | 514 Count | 436 Count | 4.28 VDC | 0.14 VDC |
| 1793620037 | 515 Count | 510 Count | 433 Count | 4.23 VDC | 0.14 VDC |
| 1793618234 | 511 Count | 507 Count | 430 Count | 4.26 VDC | 0.14 VDC |
| 1793616431 | 505 Count | 502 Count | 425 Count | 4.26 VDC | 0.14 VDC |
| 1793614628 | 501 Count | 499 Count | 422 Count | 4.28 VDC | 0.14 VDC |
| 1793612825 | 496 Count | 495 Count | 418 Count | 4.26 VDC | 0.14 VDC |
| 1793611021 | 493 Count | 493 Count | 416 Count | 4.29 VDC | 0.14 VDC |
| 1793609218 | 490 Count | 491 Count | 414 Count | 4.27 VDC | 0.14 VDC |
| 1793607415 | 487 Count | 489 Count | 412 Count | 4.23 VDC | 0.14 VDC |
| 1793605612 | 483 Count | 486 Count | 409 Count | 4.25 VDC | 0.14 VDC |
| 1793603808 | 475 Count | 479 Count | 402 Count | 4.28 VDC | 0.14 VDC |
| 1793602005 | 469 Count | 474 Count | 397 Count | 4.26 VDC | 0.14 VDC |
| 1793600202 | 457 Count | 459 Count | 386 Count | 4.26 VDC | 0.14 VDC |
| 1793598399 | 452 Count | 455 Count | 382 Count | 4.24 VDC | 0.14 VDC |
| 1793596596 | 446 Count | 450 Count | 377 Count | 4.26 VDC | 0.14 VDC |
| 1793594792 | 441 Count | 446 Count | 373 Count | 4.28 VDC | 0.14 VDC |
| 1793592989 | 436 Count | 442 Count | 369 Count | 4.27 VDC | 0.14 VDC |
| 1793591186 | 431 Count | 438 Count | 365 Count | 4.25 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)