This is the latest recevied telemetry packets stored in our database for station/object IK1TTD-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792896106 | 46 Count | 140 Count | 43 Count | 0 VDC | 0 VDC |
| 1792892499 | 22 Count | 65 Count | 21 Count | 0 VDC | 0 VDC |
| 1792888893 | 343 Count | 1036 Count | 313 Count | 0 VDC | 0 VDC |
| 1792885286 | 320 Count | 970 Count | 292 Count | 0 VDC | 0 VDC |
| 1792881680 | 296 Count | 890 Count | 270 Count | 0 VDC | 0 VDC |
| 1792878073 | 271 Count | 818 Count | 247 Count | 0 VDC | 0 VDC |
| 1792874505 | 247 Count | 743 Count | 225 Count | 0 VDC | 0 VDC |
| 1792870899 | 224 Count | 676 Count | 204 Count | 0 VDC | 0 VDC |
| 1792867292 | 199 Count | 604 Count | 181 Count | 0 VDC | 0 VDC |
| 1792863686 | 176 Count | 524 Count | 160 Count | 0 VDC | 0 VDC |
| 1792860079 | 153 Count | 452 Count | 139 Count | 0 VDC | 0 VDC |
| 1792856474 | 130 Count | 381 Count | 118 Count | 0 VDC | 0 VDC |
| 1792852900 | 113 Count | 321 Count | 103 Count | 0 VDC | 0 VDC |
| 1792849294 | 92 Count | 262 Count | 84 Count | 0 VDC | 0 VDC |
| 1792845687 | 72 Count | 204 Count | 66 Count | 0 VDC | 0 VDC |
| 1792842080 | 52 Count | 148 Count | 48 Count | 0 VDC | 0 VDC |
| 1792838474 | 32 Count | 89 Count | 30 Count | 0 VDC | 0 VDC |
| 1792834867 | 11 Count | 32 Count | 11 Count | 0 VDC | 0 VDC |
| 1792831302 | 326 Count | 983 Count | 299 Count | 0 VDC | 0 VDC |
| 1792827696 | 303 Count | 917 Count | 278 Count | 0 VDC | 0 VDC |
| 1792824089 | 282 Count | 843 Count | 259 Count | 0 VDC | 0 VDC |
| 1792820482 | 257 Count | 776 Count | 236 Count | 0 VDC | 0 VDC |
| 1792816876 | 233 Count | 713 Count | 214 Count | 0 VDC | 0 VDC |
| 1792813269 | 209 Count | 647 Count | 192 Count | 0 VDC | 0 VDC |
| 1792809702 | 186 Count | 586 Count | 171 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)