This is the latest recevied telemetry packets stored in our database for station/object SP6PTT. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789678147 | 20 Count | 127 Count | 20 Count | 0 VDC | 0 VDC |
| 1789676346 | 178 Count | 1034 Count | 158 Count | 0 VDC | 0 VDC |
| 1789674545 | 154 Count | 875 Count | 135 Count | 0 VDC | 0 VDC |
| 1789672745 | 132 Count | 727 Count | 114 Count | 0 VDC | 0 VDC |
| 1789670944 | 96 Count | 530 Count | 80 Count | 0 VDC | 0 VDC |
| 1789669143 | 79 Count | 402 Count | 64 Count | 0 VDC | 0 VDC |
| 1789667342 | 62 Count | 335 Count | 52 Count | 0 VDC | 0 VDC |
| 1789665542 | 29 Count | 151 Count | 25 Count | 0 VDC | 0 VDC |
| 1789663750 | 140 Count | 1044 Count | 131 Count | 0 VDC | 0 VDC |
| 1789661948 | 124 Count | 936 Count | 116 Count | 0 VDC | 0 VDC |
| 1789660147 | 108 Count | 821 Count | 101 Count | 0 VDC | 0 VDC |
| 1789658346 | 90 Count | 699 Count | 84 Count | 0 VDC | 0 VDC |
| 1789656546 | 73 Count | 555 Count | 68 Count | 0 VDC | 0 VDC |
| 1789654745 | 55 Count | 385 Count | 51 Count | 0 VDC | 0 VDC |
| 1789652944 | 38 Count | 226 Count | 35 Count | 0 VDC | 0 VDC |
| 1789651143 | 136 Count | 1046 Count | 130 Count | 0 VDC | 0 VDC |
| 1789649342 | 113 Count | 875 Count | 108 Count | 0 VDC | 0 VDC |
| 1789647542 | 91 Count | 695 Count | 87 Count | 0 VDC | 0 VDC |
| 1789645741 | 75 Count | 554 Count | 72 Count | 0 VDC | 0 VDC |
| 1789643940 | 58 Count | 432 Count | 56 Count | 0 VDC | 0 VDC |
| 1789642147 | 41 Count | 304 Count | 40 Count | 0 VDC | 0 VDC |
| 1789640346 | 19 Count | 167 Count | 19 Count | 0 VDC | 0 VDC |
| 1789638546 | 133 Count | 1041 Count | 121 Count | 0 VDC | 0 VDC |
| 1789636745 | 103 Count | 819 Count | 96 Count | 0 VDC | 0 VDC |
| 1789634944 | 81 Count | 625 Count | 75 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)