This is the latest recevied telemetry packets stored in our database for station/object M9NSZ-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789698035 | 218 Count | 869 Count | 0 Count | 0 VDC | 0 VDC |
| 1789696232 | 217 Count | 869 Count | 0 Count | 0 VDC | 0 VDC |
| 1789694429 | 216 Count | 869 Count | 0 Count | 0 VDC | 0 VDC |
| 1789692663 | 215 Count | 869 Count | 0 Count | 0 VDC | 0 VDC |
| 1789690860 | 214 Count | 869 Count | 0 Count | 0 VDC | 0 VDC |
| 1789689057 | 213 Count | 869 Count | 0 Count | 0 VDC | 0 VDC |
| 1789687254 | 212 Count | 869 Count | 0 Count | 0 VDC | 0 VDC |
| 1789685451 | 211 Count | 869 Count | 0 Count | 0 VDC | 0 VDC |
| 1789683648 | 210 Count | 869 Count | 0 Count | 0 VDC | 0 VDC |
| 1789681844 | 209 Count | 869 Count | 0 Count | 0 VDC | 0 VDC |
| 1789680041 | 208 Count | 869 Count | 0 Count | 0 VDC | 0 VDC |
| 1789678238 | 207 Count | 869 Count | 0 Count | 0 VDC | 0 VDC |
| 1789676435 | 206 Count | 869 Count | 0 Count | 0 VDC | 0 VDC |
| 1789674632 | 205 Count | 869 Count | 0 Count | 0 VDC | 0 VDC |
| 1789672829 | 204 Count | 869 Count | 0 Count | 0 VDC | 0 VDC |
| 1789671062 | 203 Count | 869 Count | 0 Count | 0 VDC | 0 VDC |
| 1789669259 | 202 Count | 867 Count | 0 Count | 0 VDC | 0 VDC |
| 1789667456 | 201 Count | 859 Count | 0 Count | 0 VDC | 0 VDC |
| 1789665653 | 200 Count | 856 Count | 0 Count | 0 VDC | 0 VDC |
| 1789663850 | 199 Count | 855 Count | 0 Count | 0 VDC | 0 VDC |
| 1789662047 | 198 Count | 854 Count | 0 Count | 0 VDC | 0 VDC |
| 1789660244 | 197 Count | 854 Count | 0 Count | 0 VDC | 0 VDC |
| 1789658441 | 196 Count | 853 Count | 0 Count | 0 VDC | 0 VDC |
| 1789656638 | 195 Count | 853 Count | 0 Count | 0 VDC | 0 VDC |
| 1789654835 | 194 Count | 852 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)