This is the latest recevied telemetry packets stored in our database for station/object VA3RHH-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1747728882 | 402 | 584 | 0 | 0 | 0 |
| 1747727092 | 400 | 583 | 0 | 0 | 0 |
| 1747723512 | 400 | 584 | 0 | 0 | 0 |
| 1747721720 | 400 | 585 | 0 | 0 | 0 |
| 1747719930 | 400 | 586 | 0 | 0 | 0 |
| 1747710976 | 401 | 592 | 0 | 0 | 0 |
| 1747709184 | 401 | 594 | 0 | 0 | 0 |
| 1747707393 | 401 | 596 | 0 | 0 | 0 |
| 1747705602 | 402 | 599 | 0 | 0 | 0 |
| 1747700224 | 402 | 611 | 0 | 0 | 0 |
| 1747698432 | 402 | 616 | 0 | 0 | 0 |
| 1747696637 | 402 | 618 | 0 | 0 | 0 |
| 1747694843 | 403 | 618 | 0 | 0 | 0 |
| 1747693049 | 403 | 617 | 0 | 0 | 0 |
| 1747691255 | 404 | 615 | 0 | 0 | 0 |
| 1747689460 | 404 | 613 | 0 | 0 | 0 |
| 1747687667 | 404 | 610 | 0 | 0 | 0 |
| 1747685873 | 405 | 608 | 0 | 0 | 0 |
| 1747684081 | 405 | 607 | 0 | 0 | 0 |
| 1747680495 | 406 | 606 | 0 | 0 | 0 |
| 1747676907 | 407 | 605 | 0 | 0 | 0 |
| 1747675114 | 407 | 604 | 0 | 0 | 0 |
| 1747673321 | 408 | 605 | 0 | 0 | 0 |
| 1747671529 | 409 | 604 | 0 | 0 | 0 |
| 1747669731 | 461 | 604 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)