This is the latest recevied telemetry packets stored in our database for station/object SP8NCG-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1788976179 | 730 Count | 412 Count | 0 Count | 0 VDC | 0 VDC |
| 1788974389 | 723 Count | 409 Count | 0 Count | 0 VDC | 0 VDC |
| 1788972588 | 718 Count | 406 Count | 0 Count | 0 VDC | 0 VDC |
| 1788970788 | 711 Count | 403 Count | 0 Count | 0 VDC | 0 VDC |
| 1788968987 | 706 Count | 400 Count | 0 Count | 0 VDC | 0 VDC |
| 1788967186 | 699 Count | 397 Count | 0 Count | 0 VDC | 0 VDC |
| 1788965385 | 694 Count | 394 Count | 0 Count | 0 VDC | 0 VDC |
| 1788963584 | 687 Count | 391 Count | 0 Count | 0 VDC | 0 VDC |
| 1788961784 | 681 Count | 387 Count | 0 Count | 0 VDC | 0 VDC |
| 1788959983 | 674 Count | 384 Count | 0 Count | 0 VDC | 0 VDC |
| 1788958182 | 669 Count | 381 Count | 0 Count | 0 VDC | 0 VDC |
| 1788956381 | 665 Count | 378 Count | 0 Count | 0 VDC | 0 VDC |
| 1788954581 | 664 Count | 375 Count | 0 Count | 0 VDC | 0 VDC |
| 1788952786 | 657 Count | 372 Count | 0 Count | 0 VDC | 0 VDC |
| 1788950986 | 652 Count | 369 Count | 0 Count | 0 VDC | 0 VDC |
| 1788949185 | 645 Count | 366 Count | 0 Count | 0 VDC | 0 VDC |
| 1788947384 | 640 Count | 363 Count | 0 Count | 0 VDC | 0 VDC |
| 1788945583 | 633 Count | 360 Count | 0 Count | 0 VDC | 0 VDC |
| 1788943782 | 628 Count | 357 Count | 0 Count | 0 VDC | 0 VDC |
| 1788941982 | 621 Count | 354 Count | 0 Count | 0 VDC | 0 VDC |
| 1788940181 | 609 Count | 342 Count | 0 Count | 0 VDC | 0 VDC |
| 1788938380 | 602 Count | 339 Count | 0 Count | 0 VDC | 0 VDC |
| 1788936579 | 597 Count | 336 Count | 0 Count | 0 VDC | 0 VDC |
| 1788934778 | 593 Count | 333 Count | 0 Count | 0 VDC | 0 VDC |
| 1788932978 | 592 Count | 330 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)