This is the latest recevied telemetry packets stored in our database for station/object W7AFM-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1761116643 | 403 | 596 | 0 | 0 | 0 |
1761114850 | 402 | 597 | 0 | 0 | 0 |
1761113057 | 403 | 598 | 0 | 0 | 0 |
1761111264 | 402 | 598 | 0 | 0 | 0 |
1761109472 | 402 | 599 | 0 | 0 | 0 |
1761107678 | 403 | 599 | 0 | 0 | 0 |
1761105885 | 402 | 600 | 0 | 0 | 0 |
1761104092 | 403 | 600 | 0 | 0 | 0 |
1761102299 | 403 | 601 | 0 | 0 | 0 |
1761101320 | 403 | 601 | 0 | 0 | 0 |
1761100608 | 403 | 602 | 0 | 0 | 0 |
1761100506 | 403 | 601 | 0 | 0 | 0 |
1761098713 | 403 | 602 | 0 | 0 | 0 |
1761096919 | 390 | 602 | 0 | 0 | 0 |
1761095126 | 402 | 602 | 0 | 0 | 0 |
1761093332 | 403 | 603 | 0 | 0 | 0 |
1761091539 | 403 | 603 | 0 | 0 | 0 |
1761089746 | 403 | 603 | 0 | 0 | 0 |
1761087952 | 403 | 602 | 0 | 0 | 0 |
1761086159 | 402 | 601 | 0 | 0 | 0 |
1761084365 | 402 | 600 | 0 | 0 | 0 |
1761082572 | 402 | 599 | 0 | 0 | 0 |
1761080779 | 402 | 598 | 0 | 0 | 0 |
1761078986 | 402 | 597 | 0 | 0 | 0 |
1761077192 | 402 | 596 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)