This is the latest recevied telemetry packets stored in our database for station/object F4HVV-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1742420848 | 2.93 | 0 | 0 | 0 | 0 |
| 1742420600 | 2.93 | 0 | 0 | 0 | 0 |
| 1742416993 | 3 | 0 | 0 | 0 | 0 |
| 1742413387 | 3.06 | 0 | 0 | 0 | 0 |
| 1742409782 | 3.1 | 0 | 0 | 0 | 0 |
| 1742406176 | 3.15 | 0 | 0 | 0 | 0 |
| 1742398956 | 3.23 | 0 | 0 | 0 | 0 |
| 1742395347 | 3.28 | 0 | 0 | 0 | 0 |
| 1742391743 | 3.31 | 0 | 0 | 0 | 0 |
| 1742388136 | 3.35 | 0 | 0 | 0 | 0 |
| 1742384529 | 3.39 | 0 | 0 | 0 | 0 |
| 1742380923 | 3.42 | 0 | 0 | 0 | 0 |
| 1742377307 | 3.44 | 0 | 0 | 0 | 0 |
| 1742377060 | 3.44 | 0 | 0 | 0 | 0 |
| 1742376918 | 3.45 | 0 | 0 | 0 | 0 |
| 1742376645 | 3.43 | 0 | 0 | 0 | 0 |
| 1742374252 | 3.46 | 0 | 0 | 0 | 0 |
| 1742373994 | 3.46 | 0 | 0 | 0 | 0 |
| 1742373742 | 3.46 | 0 | 0 | 0 | 0 |
| 1742371721 | 3.47 | 0 | 0 | 0 | 0 |
| 1742368113 | 3.48 | 0 | 0 | 0 | 0 |
| 1742367701 | 3.49 | 0 | 0 | 0 | 0 |
| 1742366196 | 3.5 | 0 | 0 | 0 | 0 |
| 1742365949 | 3.5 | 0 | 0 | 0 | 0 |
| 1742363804 | 3.51 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)