This is the latest recevied telemetry packets stored in our database for station/object VK2GJ-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1742217113 | 3988 | 0 | 61 | 1298 | 8025 |
| 1742216754 | 3989 | 0 | 57 | 1298 | 8025 |
| 1742216417 | 3979 | 0 | 62 | 1309 | 8025 |
| 1742216043 | 3975 | 0 | 134 | 1326 | 8024 |
| 1742216007 | 3980 | 0 | 122 | 1318 | 8025 |
| 1742215656 | 3971 | 0 | 115 | 1303 | 8024 |
| 1742214990 | 3976 | 0 | 70 | 1303 | 8024 |
| 1742214647 | 3975 | 0 | 67 | 1309 | 8024 |
| 1742214194 | 3981 | 0 | 65 | 1298 | 8024 |
| 1742213708 | 3970 | 0 | 74 | 1310 | 8023 |
| 1742213336 | 3975 | 0 | 66 | 1310 | 8022 |
| 1742212955 | 3980 | 0 | 119 | 1300 | 8023 |
| 1742212555 | 3974 | 0 | 69 | 1304 | 8023 |
| 1742212188 | 3982 | 0 | 79 | 1307 | 8023 |
| 1742211486 | 3973 | 0 | 71 | 1308 | 8023 |
| 1742211144 | 3972 | 0 | 77 | 1313 | 8023 |
| 1742210762 | 3972 | 0 | 75 | 1308 | 8023 |
| 1742210377 | 3976 | 0 | 64 | 1297 | 8024 |
| 1742210010 | 3975 | 0 | 67 | 1297 | 8024 |
| 1742209659 | 3980 | 0 | 64 | 1301 | 8024 |
| 1742209289 | 3980 | 0 | 71 | 1299 | 8025 |
| 1742208979 | 3978 | 0 | 73 | 1314 | 8024 |
| 1742208564 | 3972 | 0 | 60 | 1296 | 8025 |
| 1742208195 | 3985 | 0 | 69 | 1298 | 8025 |
| 1742207834 | 3974 | 0 | 59 | 1294 | 8024 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)