This is the latest recevied telemetry packets stored in our database for station/object SP6RJ-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1754166871 | 640 Count | 0 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1754166270 | 634 Count | 0 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1754165670 | 627 Count | 0 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1754165069 | 621 Count | 0 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1754164469 | 608 Count | 0 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1754163869 | 601 Count | 0 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1754163269 | 597 Count | 0 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1754162669 | 587 Count | 0 Count | 0 Count | 4.36 VDC | 0 VDC |
| 1754162068 | 581 Count | 0 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1754161467 | 573 Count | 0 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1754160867 | 566 Count | 0 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1754160267 | 558 Count | 0 Count | 0 Count | 4.35 VDC | 0 VDC |
| 1754159667 | 553 Count | 0 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1754159067 | 546 Count | 0 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1754158466 | 539 Count | 0 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1754157865 | 532 Count | 0 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1754157265 | 523 Count | 0 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1754156665 | 512 Count | 0 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1754156065 | 506 Count | 0 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1754155471 | 491 Count | 0 Count | 0 Count | 4.35 VDC | 0 VDC |
| 1754154871 | 483 Count | 0 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1754154271 | 478 Count | 0 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1754153671 | 472 Count | 0 Count | 0 Count | 4.36 VDC | 0 VDC |
| 1754153071 | 465 Count | 0 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1754152471 | 460 Count | 0 Count | 0 Count | 4.21 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)