This is the latest recevied telemetry packets stored in our database for station/object VK2GJ-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Vbat* | Vsol* | Psys* | Temp* | AirP* |
---|---|---|---|---|---|
1758003050 | 3.86 V | 0.21 V | 344 mW | 25 degC | 99537.5 Pa |
1758001262 | 3.86 V | 0.41 V | 348 mW | 25 degC | 99537.5 Pa |
1757999477 | 3.67 V | 0.63 V | 352 mW | 24.7 degC | 99500 Pa |
1757997654 | 3.86 V | 0.75 V | 356 mW | 24.5 degC | 99562.5 Pa |
1757995856 | 3.66 V | 0.56 V | 352 mW | 24.5 degC | 99600 Pa |
1757994082 | 3.86 V | 0.54 V | 362 mW | 24.3 degC | 99637.5 Pa |
1757992259 | 3.78 V | 0.58 V | 358 mW | 24.2 degC | 99700 Pa |
1757990460 | 3.86 V | 0.58 V | 358 mW | 23.8 degC | 99725 Pa |
1757988689 | 3.86 V | 0.59 V | 342 mW | 23.7 degC | 99800 Pa |
1757986863 | 3.67 V | 0.62 V | 360 mW | 23.6 degC | 99837.5 Pa |
1757985065 | 3.86 V | 0.63 V | 354 mW | 23.3 degC | 99887.5 Pa |
1757983291 | 3.86 V | 0.61 V | 364 mW | 23.3 degC | 99925 Pa |
1757981467 | 3.86 V | 0.6 V | 362 mW | 23.2 degC | 99962.5 Pa |
1757979686 | 3.63 V | 0.56 V | 370 mW | 23.2 degC | 100000 Pa |
1757977945 | 3.65 V | 0.55 V | 364 mW | 23.1 degC | 100025 Pa |
1757976086 | 3.63 V | 0.46 V | 364 mW | 23 degC | 100037.5 Pa |
1757974288 | 3.65 V | 0.43 V | 350 mW | 22.8 degC | 100050 Pa |
1757972509 | 3.63 V | 0.34 V | 356 mW | 22.6 degC | 100050 Pa |
1757970678 | 3.65 V | 0.21 V | 356 mW | 22.7 degC | 100037.5 Pa |
1757968888 | 3.63 V | 0.15 V | 358 mW | 22.4 degC | 100012.5 Pa |
1757967114 | 3.61 V | 0.06 V | 364 mW | 22.6 degC | 100012.5 Pa |
1757965291 | 3.65 V | 0 V | 346 mW | 22.8 degC | 100000 Pa |
1757963487 | 3.63 V | 0 V | 346 mW | 22.6 degC | 99975 Pa |
1757961710 | 3.63 V | 0 V | 356 mW | 22.9 degC | 99975 Pa |
1757959889 | 3.63 V | 0 V | 362 mW | 22.9 degC | 99962.5 Pa |
*Used Equation Coefficients:
Vbat: 0, 0.001, 0
Vsol: 0, 0.001, 0
Psys: 0, 2, 0
Temp: 0, 0.1, -100
AirP: 0, 12.5, 500
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)