This is the latest recevied telemetry packets stored in our database for station/object MB7USU-5. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1788999536 | 347 Count | 478 Count | 243 Count | 0 VDC | 0 VDC |
| 1788997735 | 345 Count | 476 Count | 242 Count | 0 VDC | 0 VDC |
| 1788995935 | 343 Count | 474 Count | 241 Count | 0 VDC | 0 VDC |
| 1788994134 | 341 Count | 472 Count | 240 Count | 0 VDC | 0 VDC |
| 1788992333 | 338 Count | 469 Count | 238 Count | 0 VDC | 0 VDC |
| 1788990533 | 336 Count | 467 Count | 237 Count | 0 VDC | 0 VDC |
| 1788988732 | 334 Count | 465 Count | 236 Count | 0 VDC | 0 VDC |
| 1788986937 | 332 Count | 463 Count | 235 Count | 0 VDC | 0 VDC |
| 1788985137 | 330 Count | 461 Count | 234 Count | 0 VDC | 0 VDC |
| 1788983336 | 327 Count | 458 Count | 232 Count | 0 VDC | 0 VDC |
| 1788981535 | 325 Count | 456 Count | 231 Count | 0 VDC | 0 VDC |
| 1788979734 | 323 Count | 454 Count | 230 Count | 0 VDC | 0 VDC |
| 1788977934 | 321 Count | 452 Count | 229 Count | 0 VDC | 0 VDC |
| 1788976133 | 319 Count | 450 Count | 228 Count | 0 VDC | 0 VDC |
| 1788974332 | 316 Count | 447 Count | 226 Count | 0 VDC | 0 VDC |
| 1788972532 | 314 Count | 446 Count | 225 Count | 0 VDC | 0 VDC |
| 1788970731 | 312 Count | 444 Count | 224 Count | 0 VDC | 0 VDC |
| 1788968930 | 310 Count | 442 Count | 223 Count | 0 VDC | 0 VDC |
| 1788967129 | 308 Count | 440 Count | 222 Count | 0 VDC | 0 VDC |
| 1788965337 | 305 Count | 437 Count | 220 Count | 0 VDC | 0 VDC |
| 1788963536 | 303 Count | 435 Count | 219 Count | 0 VDC | 0 VDC |
| 1788961735 | 301 Count | 433 Count | 218 Count | 0 VDC | 0 VDC |
| 1788959935 | 299 Count | 431 Count | 217 Count | 0 VDC | 0 VDC |
| 1788958134 | 297 Count | 429 Count | 216 Count | 0 VDC | 0 VDC |
| 1788956333 | 294 Count | 427 Count | 214 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)