This is the latest recevied telemetry packets stored in our database for station/object SR8ULZ-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792883034 | 531 Count | 720 Count | 237 Count | 0 VDC | 0 VDC |
| 1792881240 | 525 Count | 719 Count | 236 Count | 0 VDC | 0 VDC |
| 1792879440 | 523 Count | 718 Count | 235 Count | 0 VDC | 0 VDC |
| 1792877639 | 520 Count | 716 Count | 233 Count | 0 VDC | 0 VDC |
| 1792875838 | 517 Count | 714 Count | 231 Count | 0 VDC | 0 VDC |
| 1792874038 | 514 Count | 712 Count | 229 Count | 0 VDC | 0 VDC |
| 1792872237 | 511 Count | 710 Count | 227 Count | 0 VDC | 0 VDC |
| 1792870436 | 508 Count | 708 Count | 225 Count | 0 VDC | 0 VDC |
| 1792868636 | 505 Count | 706 Count | 223 Count | 0 VDC | 0 VDC |
| 1792866835 | 503 Count | 705 Count | 222 Count | 0 VDC | 0 VDC |
| 1792865035 | 501 Count | 704 Count | 221 Count | 0 VDC | 0 VDC |
| 1792863234 | 499 Count | 702 Count | 220 Count | 0 VDC | 0 VDC |
| 1792861433 | 497 Count | 700 Count | 219 Count | 0 VDC | 0 VDC |
| 1792859639 | 491 Count | 699 Count | 218 Count | 0 VDC | 0 VDC |
| 1792857839 | 489 Count | 698 Count | 217 Count | 0 VDC | 0 VDC |
| 1792856038 | 487 Count | 697 Count | 216 Count | 0 VDC | 0 VDC |
| 1792854238 | 486 Count | 697 Count | 216 Count | 0 VDC | 0 VDC |
| 1792852437 | 484 Count | 696 Count | 215 Count | 0 VDC | 0 VDC |
| 1792850636 | 482 Count | 695 Count | 214 Count | 0 VDC | 0 VDC |
| 1792848836 | 480 Count | 694 Count | 213 Count | 0 VDC | 0 VDC |
| 1792847035 | 478 Count | 692 Count | 212 Count | 0 VDC | 0 VDC |
| 1792845234 | 476 Count | 691 Count | 211 Count | 0 VDC | 0 VDC |
| 1792843434 | 474 Count | 690 Count | 210 Count | 0 VDC | 0 VDC |
| 1792841633 | 472 Count | 689 Count | 209 Count | 0 VDC | 0 VDC |
| 1792839833 | 470 Count | 688 Count | 208 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)