This is the latest recevied telemetry packets stored in our database for station/object MB7ULR. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1783273362 | 844 Count | 727 Count | 291 Count | 4.16 VDC | 0.14 VDC |
| 1783271862 | 841 Count | 725 Count | 291 Count | 4.12 VDC | 0.14 VDC |
| 1783270361 | 836 Count | 721 Count | 290 Count | 4.17 VDC | 0.14 VDC |
| 1783268860 | 831 Count | 717 Count | 289 Count | 4.07 VDC | 0.14 VDC |
| 1783267359 | 827 Count | 714 Count | 288 Count | 4.09 VDC | 0.14 VDC |
| 1783265859 | 822 Count | 710 Count | 287 Count | 4.17 VDC | 0.14 VDC |
| 1783264358 | 818 Count | 706 Count | 286 Count | 4.17 VDC | 0.14 VDC |
| 1783262858 | 815 Count | 704 Count | 286 Count | 4.17 VDC | 0.14 VDC |
| 1783261357 | 810 Count | 700 Count | 285 Count | 4.16 VDC | 0.14 VDC |
| 1783259856 | 805 Count | 696 Count | 284 Count | 4.1 VDC | 0.14 VDC |
| 1783258356 | 801 Count | 694 Count | 283 Count | 4.08 VDC | 0.14 VDC |
| 1783256855 | 796 Count | 690 Count | 282 Count | 4.11 VDC | 0.14 VDC |
| 1783255355 | 792 Count | 686 Count | 281 Count | 4.12 VDC | 0.14 VDC |
| 1783253854 | 789 Count | 684 Count | 281 Count | 4.09 VDC | 0.14 VDC |
| 1783252353 | 784 Count | 680 Count | 280 Count | 4.07 VDC | 0.14 VDC |
| 1783250853 | 779 Count | 677 Count | 279 Count | 4.09 VDC | 0.14 VDC |
| 1783249352 | 775 Count | 674 Count | 278 Count | 4.17 VDC | 0.14 VDC |
| 1783247852 | 770 Count | 670 Count | 277 Count | 4.15 VDC | 0.14 VDC |
| 1783246351 | 766 Count | 666 Count | 276 Count | 4.11 VDC | 0.14 VDC |
| 1783244850 | 763 Count | 664 Count | 276 Count | 4.11 VDC | 0.14 VDC |
| 1783243350 | 758 Count | 660 Count | 275 Count | 4.13 VDC | 0.14 VDC |
| 1783241849 | 721 Count | 619 Count | 241 Count | 4.13 VDC | 0.14 VDC |
| 1783240349 | 700 Count | 599 Count | 223 Count | 4.16 VDC | 0.14 VDC |
| 1783238848 | 696 Count | 597 Count | 222 Count | 4.08 VDC | 0.14 VDC |
| 1783237347 | 691 Count | 593 Count | 221 Count | 4.17 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)