This is the latest recevied telemetry packets stored in our database for station/object SR2GG-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1747092557 | 19 Count | 143 Count | 19 Count | 4.21 VDC | 0 VDC |
| 1747091116 | 86 Count | 1127 Count | 79 Count | 4.21 VDC | 0 VDC |
| 1747089675 | 75 Count | 995 Count | 69 Count | 4.22 VDC | 0 VDC |
| 1747088235 | 64 Count | 845 Count | 59 Count | 4.23 VDC | 0 VDC |
| 1747086794 | 57 Count | 707 Count | 53 Count | 4.2 VDC | 0 VDC |
| 1747085353 | 48 Count | 561 Count | 45 Count | 4.23 VDC | 0 VDC |
| 1747083912 | 34 Count | 441 Count | 32 Count | 4.22 VDC | 0 VDC |
| 1747082483 | 23 Count | 317 Count | 22 Count | 4.22 VDC | 0 VDC |
| 1747081042 | 14 Count | 165 Count | 14 Count | 4.22 VDC | 0 VDC |
| 1747079601 | 66 Count | 1114 Count | 59 Count | 4.23 VDC | 0 VDC |
| 1747078161 | 58 Count | 994 Count | 52 Count | 4.21 VDC | 0 VDC |
| 1747076720 | 48 Count | 855 Count | 43 Count | 4.23 VDC | 0 VDC |
| 1747075279 | 40 Count | 740 Count | 36 Count | 4.22 VDC | 0 VDC |
| 1747073838 | 32 Count | 603 Count | 29 Count | 4.22 VDC | 0 VDC |
| 1747072397 | 17 Count | 404 Count | 15 Count | 4.2 VDC | 0 VDC |
| 1747070956 | 10 Count | 288 Count | 9 Count | 4.2 VDC | 0 VDC |
| 1747069516 | 4 Count | 142 Count | 4 Count | 4.21 VDC | 0 VDC |
| 1747068075 | 48 Count | 1135 Count | 43 Count | 4.21 VDC | 0 VDC |
| 1747066634 | 39 Count | 978 Count | 35 Count | 4.2 VDC | 0 VDC |
| 1747065193 | 33 Count | 751 Count | 30 Count | 4.2 VDC | 0 VDC |
| 1747063752 | 25 Count | 625 Count | 23 Count | 4.21 VDC | 0 VDC |
| 1747062311 | 15 Count | 431 Count | 14 Count | 4.21 VDC | 0 VDC |
| 1747060895 | 8 Count | 212 Count | 8 Count | 4.2 VDC | 0 VDC |
| 1747059454 | 74 Count | 1003 Count | 69 Count | 4.22 VDC | 0 VDC |
| 1747058013 | 66 Count | 828 Count | 62 Count | 4.21 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)