This is the latest recevied telemetry packets stored in our database for station/object AF5LI-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1742489181 | 3990 | 0 | 65 | 1448 | 8157 |
| 1742489052 | 3987 | 0 | 56 | 1437 | 8157 |
| 1742488931 | 3990 | 0 | 63 | 1436 | 8157 |
| 1742488815 | 3989 | 0 | 78 | 1443 | 8157 |
| 1742488763 | 3988 | 0 | 73 | 1438 | 8157 |
| 1742488579 | 3990 | 0 | 64 | 1404 | 8158 |
| 1742488450 | 3988 | 0 | 61 | 1413 | 8157 |
| 1742488330 | 3991 | 0 | 64 | 1421 | 8158 |
| 1742488235 | 3991 | 0 | 65 | 1420 | 8158 |
| 1742488090 | 3989 | 0 | 56 | 1408 | 8158 |
| 1742487970 | 3988 | 0 | 61 | 1415 | 8158 |
| 1742487845 | 3987 | 0 | 68 | 1430 | 8159 |
| 1742487762 | 3989 | 0 | 83 | 1452 | 8159 |
| 1742487663 | 3989 | 0 | 72 | 1459 | 8158 |
| 1742487491 | 3988 | 0 | 59 | 1466 | 8158 |
| 1742487346 | 3987 | 6 | 126 | 1496 | 8159 |
| 1742487334 | 3987 | 3 | 99 | 1493 | 8159 |
| 1742487202 | 3989 | 0 | 87 | 1482 | 8158 |
| 1742487024 | 3987 | 1 | 99 | 1487 | 8158 |
| 1742486686 | 3989 | 0 | 123 | 1478 | 8159 |
| 1742486674 | 3992 | 0 | 98 | 1477 | 8160 |
| 1742486538 | 3990 | 0 | 97 | 1481 | 8159 |
| 1742486406 | 3990 | 0 | 83 | 1466 | 8159 |
| 1742486248 | 3990 | 0 | 75 | 1432 | 8157 |
| 1742486122 | 3987 | 0 | 81 | 1434 | 8159 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)