This is the latest recevied telemetry packets stored in our database for station/object AF5LI-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1742489226 | 3980 | 0 | 66 | 1410 | 8158 |
| 1742489103 | 3984 | 0 | 68 | 1414 | 8158 |
| 1742488982 | 3983 | 0 | 68 | 1408 | 8158 |
| 1742488861 | 3984 | 0 | 69 | 1391 | 8157 |
| 1742488738 | 3982 | 0 | 58 | 1387 | 8158 |
| 1742488626 | 3982 | 0 | 71 | 1393 | 8158 |
| 1742488488 | 3983 | 0 | 63 | 1364 | 8158 |
| 1742488395 | 3981 | 0 | 72 | 1383 | 8158 |
| 1742488265 | 3982 | 0 | 63 | 1359 | 8159 |
| 1742488141 | 3981 | 0 | 67 | 1362 | 8160 |
| 1742488011 | 3982 | 0 | 69 | 1368 | 8159 |
| 1742487924 | 3979 | 0 | 75 | 1392 | 8159 |
| 1742487784 | 3985 | 0 | 66 | 1378 | 8159 |
| 1742487669 | 3984 | 0 | 75 | 1375 | 8159 |
| 1742487547 | 3987 | 0 | 80 | 1387 | 8159 |
| 1742487438 | 3986 | 0 | 77 | 1410 | 8159 |
| 1742487290 | 3982 | 0 | 69 | 1388 | 8158 |
| 1742487176 | 3980 | 0 | 66 | 1418 | 8159 |
| 1742487059 | 3980 | 0 | 67 | 1428 | 8158 |
| 1742486936 | 3980 | 0 | 71 | 1425 | 8158 |
| 1742486813 | 3983 | 0 | 74 | 1425 | 8158 |
| 1742486708 | 3985 | 0 | 69 | 1434 | 8159 |
| 1742486574 | 3983 | 0 | 60 | 1416 | 8159 |
| 1742486454 | 3983 | 0 | 59 | 1411 | 8158 |
| 1742486339 | 3987 | 0 | 75 | 1414 | 8159 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)