This is the latest recevied telemetry packets stored in our database for station/object AF5LI-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1742489201 | 3980 | 0 | 58 | 1429 | 8160 |
| 1742488955 | 3986 | 0 | 57 | 1423 | 8160 |
| 1742488834 | 3985 | 0 | 59 | 1408 | 8160 |
| 1742488716 | 3979 | 0 | 56 | 1400 | 8160 |
| 1742488592 | 3988 | 0 | 53 | 1383 | 8161 |
| 1742488470 | 3985 | 0 | 57 | 1378 | 8160 |
| 1742488346 | 3984 | 0 | 55 | 1363 | 8160 |
| 1742488225 | 3978 | 0 | 52 | 1361 | 8161 |
| 1742488107 | 3986 | 0 | 55 | 1356 | 8160 |
| 1742487985 | 3980 | 0 | 56 | 1370 | 8160 |
| 1742487884 | 3982 | 0 | 67 | 1386 | 8161 |
| 1742487751 | 3980 | 0 | 58 | 1377 | 8161 |
| 1742487622 | 3985 | 0 | 54 | 1373 | 8161 |
| 1742487510 | 3981 | 0 | 59 | 1381 | 8160 |
| 1742487399 | 3983 | 0 | 66 | 1395 | 8161 |
| 1742487270 | 3983 | 0 | 60 | 1393 | 8160 |
| 1742487150 | 3985 | 0 | 60 | 1403 | 8160 |
| 1742487035 | 3982 | 0 | 58 | 1412 | 8160 |
| 1742486905 | 3983 | 0 | 56 | 1405 | 8160 |
| 1742486782 | 3982 | 0 | 56 | 1404 | 8161 |
| 1742486664 | 3983 | 0 | 57 | 1400 | 8161 |
| 1742486552 | 3983 | 0 | 57 | 1400 | 8160 |
| 1742486432 | 3986 | 0 | 59 | 1389 | 8160 |
| 1742486299 | 3984 | 0 | 54 | 1379 | 8160 |
| 1742486183 | 3978 | 0 | 56 | 1375 | 8160 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)