This is the latest recevied telemetry packets stored in our database for station/object F4DIW-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1774373874 | 286 Count | 363 Count | 214 Count | 0.28 VDC | 0 VDC |
| 1774372073 | 282 Count | 360 Count | 211 Count | 0.28 VDC | 0 VDC |
| 1774370273 | 278 Count | 353 Count | 208 Count | 0.28 VDC | 0 VDC |
| 1774368472 | 274 Count | 346 Count | 205 Count | 0.28 VDC | 0 VDC |
| 1774366688 | 270 Count | 341 Count | 202 Count | 0.28 VDC | 0 VDC |
| 1774364887 | 266 Count | 335 Count | 199 Count | 0.28 VDC | 0 VDC |
| 1774363086 | 262 Count | 331 Count | 196 Count | 0.28 VDC | 0 VDC |
| 1774361286 | 258 Count | 326 Count | 193 Count | 0.28 VDC | 0 VDC |
| 1774359485 | 254 Count | 321 Count | 190 Count | 0.28 VDC | 0 VDC |
| 1774357685 | 250 Count | 316 Count | 187 Count | 0.28 VDC | 0 VDC |
| 1774355884 | 246 Count | 311 Count | 184 Count | 0.28 VDC | 0 VDC |
| 1774354083 | 242 Count | 306 Count | 181 Count | 0.28 VDC | 0 VDC |
| 1774352283 | 238 Count | 302 Count | 178 Count | 0.28 VDC | 0 VDC |
| 1774350482 | 234 Count | 297 Count | 175 Count | 0.28 VDC | 0 VDC |
| 1774348682 | 230 Count | 293 Count | 172 Count | 0.28 VDC | 0 VDC |
| 1774346881 | 226 Count | 289 Count | 169 Count | 0.28 VDC | 0 VDC |
| 1774345080 | 222 Count | 283 Count | 166 Count | 0.28 VDC | 0 VDC |
| 1774343280 | 218 Count | 277 Count | 163 Count | 0.28 VDC | 0 VDC |
| 1774341479 | 214 Count | 274 Count | 160 Count | 0.28 VDC | 0 VDC |
| 1774339678 | 210 Count | 269 Count | 157 Count | 0.28 VDC | 0 VDC |
| 1774337878 | 206 Count | 265 Count | 154 Count | 0.28 VDC | 0 VDC |
| 1774336077 | 202 Count | 260 Count | 151 Count | 0.28 VDC | 0 VDC |
| 1774334277 | 198 Count | 256 Count | 148 Count | 0.28 VDC | 0 VDC |
| 1774332476 | 194 Count | 252 Count | 145 Count | 0.28 VDC | 0 VDC |
| 1774330676 | 190 Count | 247 Count | 142 Count | 0.28 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)