This is the latest recevied telemetry packets stored in our database for station/object 3Z2T-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1768009996 | 49 Count | 693 Count | 0 Count | 4.23 VDC | 0.32 VDC |
| 1768008197 | 48 Count | 681 Count | 0 Count | 4.23 VDC | 0.32 VDC |
| 1768006397 | 47 Count | 669 Count | 0 Count | 4.23 VDC | 0.32 VDC |
| 1768004598 | 46 Count | 649 Count | 0 Count | 4.24 VDC | 0.32 VDC |
| 1768002799 | 45 Count | 633 Count | 0 Count | 4.24 VDC | 0.32 VDC |
| 1768001000 | 44 Count | 621 Count | 0 Count | 4.24 VDC | 0.32 VDC |
| 1767999200 | 43 Count | 609 Count | 0 Count | 4.24 VDC | 0.32 VDC |
| 1767997401 | 42 Count | 597 Count | 0 Count | 4.24 VDC | 0.32 VDC |
| 1767995602 | 41 Count | 579 Count | 0 Count | 4.25 VDC | 0.32 VDC |
| 1767993803 | 40 Count | 565 Count | 0 Count | 4.25 VDC | 0.32 VDC |
| 1767992004 | 39 Count | 525 Count | 0 Count | 4.25 VDC | 0.32 VDC |
| 1767990205 | 38 Count | 508 Count | 0 Count | 4.25 VDC | 0.32 VDC |
| 1767988406 | 37 Count | 496 Count | 0 Count | 4.25 VDC | 0.32 VDC |
| 1767986606 | 36 Count | 483 Count | 0 Count | 4.25 VDC | 0.32 VDC |
| 1767984807 | 35 Count | 470 Count | 0 Count | 4.25 VDC | 0.32 VDC |
| 1767983009 | 34 Count | 453 Count | 0 Count | 4.25 VDC | 0.32 VDC |
| 1767981210 | 33 Count | 441 Count | 0 Count | 4.25 VDC | 0.32 VDC |
| 1767979411 | 32 Count | 429 Count | 0 Count | 4.26 VDC | 0.32 VDC |
| 1767977611 | 31 Count | 412 Count | 0 Count | 4.26 VDC | 0.32 VDC |
| 1767975811 | 30 Count | 398 Count | 0 Count | 4.26 VDC | 0.32 VDC |
| 1767974012 | 29 Count | 373 Count | 0 Count | 4.26 VDC | 0.32 VDC |
| 1767972212 | 28 Count | 355 Count | 0 Count | 4.27 VDC | 0.32 VDC |
| 1767970413 | 27 Count | 327 Count | 0 Count | 4.27 VDC | 3.22 VDC |
| 1767968615 | 26 Count | 303 Count | 0 Count | 4.27 VDC | 5.08 VDC |
| 1767966815 | 25 Count | 294 Count | 0 Count | 4.27 VDC | 5.08 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)