This is the latest recevied telemetry packets stored in our database for station/object 3Z2T-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1746193534 | 35 Count | 952 Count | 0 Count | 4.22 VDC | 5.4 VDC |
| 1746191735 | 34 Count | 944 Count | 0 Count | 4.22 VDC | 5.42 VDC |
| 1746189936 | 33 Count | 937 Count | 0 Count | 4.22 VDC | 5.42 VDC |
| 1746188137 | 32 Count | 929 Count | 0 Count | 4.23 VDC | 5.42 VDC |
| 1746184539 | 30 Count | 916 Count | 0 Count | 4.22 VDC | 5.4 VDC |
| 1746182738 | 29 Count | 899 Count | 0 Count | 4.22 VDC | 5.4 VDC |
| 1746180939 | 28 Count | 889 Count | 0 Count | 4.22 VDC | 4.3 VDC |
| 1746179140 | 27 Count | 880 Count | 0 Count | 4.22 VDC | 4.32 VDC |
| 1746175540 | 25 Count | 853 Count | 0 Count | 4.22 VDC | 4.32 VDC |
| 1746173741 | 24 Count | 836 Count | 0 Count | 4.22 VDC | 4.32 VDC |
| 1746171941 | 23 Count | 815 Count | 0 Count | 4.21 VDC | 4.32 VDC |
| 1746170142 | 22 Count | 789 Count | 0 Count | 4.21 VDC | 4.32 VDC |
| 1746168341 | 21 Count | 781 Count | 0 Count | 4.2 VDC | 4.32 VDC |
| 1746166541 | 20 Count | 757 Count | 0 Count | 4.2 VDC | 4.32 VDC |
| 1746164741 | 19 Count | 729 Count | 0 Count | 4.2 VDC | 4.32 VDC |
| 1746162941 | 18 Count | 692 Count | 0 Count | 4.2 VDC | 4.32 VDC |
| 1746161142 | 17 Count | 670 Count | 0 Count | 4.2 VDC | 4.32 VDC |
| 1746159343 | 16 Count | 651 Count | 0 Count | 4.2 VDC | 4.32 VDC |
| 1746157544 | 15 Count | 620 Count | 0 Count | 4.2 VDC | 2.56 VDC |
| 1746155744 | 14 Count | 586 Count | 0 Count | 4.2 VDC | 0.28 VDC |
| 1746153945 | 13 Count | 545 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1746152146 | 12 Count | 511 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1746150347 | 11 Count | 472 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1746148547 | 10 Count | 434 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1746146747 | 9 Count | 393 Count | 0 Count | 4.2 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)