This is the latest recevied telemetry packets stored in our database for station/object SP2GSM-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1773437150 | 110 Count | 521 Count | 14 Count | 0 VDC | 0 VDC |
| 1773435352 | 109 Count | 521 Count | 14 Count | 0 VDC | 0 VDC |
| 1773433551 | 108 Count | 519 Count | 14 Count | 0 VDC | 0 VDC |
| 1773431749 | 107 Count | 513 Count | 14 Count | 0 VDC | 0 VDC |
| 1773429950 | 106 Count | 503 Count | 14 Count | 0 VDC | 0 VDC |
| 1773428147 | 105 Count | 498 Count | 14 Count | 0 VDC | 0 VDC |
| 1773424554 | 99 Count | 496 Count | 14 Count | 0 VDC | 0 VDC |
| 1773422753 | 98 Count | 496 Count | 14 Count | 0 VDC | 0 VDC |
| 1773420952 | 97 Count | 496 Count | 14 Count | 0 VDC | 0 VDC |
| 1773419150 | 96 Count | 494 Count | 14 Count | 0 VDC | 0 VDC |
| 1773417351 | 95 Count | 488 Count | 14 Count | 0 VDC | 0 VDC |
| 1773415550 | 94 Count | 477 Count | 14 Count | 0 VDC | 0 VDC |
| 1773413750 | 93 Count | 467 Count | 14 Count | 0 VDC | 0 VDC |
| 1773411949 | 92 Count | 446 Count | 14 Count | 0 VDC | 0 VDC |
| 1773410147 | 91 Count | 438 Count | 14 Count | 0 VDC | 0 VDC |
| 1773408348 | 90 Count | 431 Count | 14 Count | 0 VDC | 0 VDC |
| 1773406547 | 89 Count | 413 Count | 14 Count | 0 VDC | 0 VDC |
| 1773402952 | 83 Count | 389 Count | 14 Count | 0 VDC | 0 VDC |
| 1773401151 | 82 Count | 376 Count | 14 Count | 0 VDC | 0 VDC |
| 1773399352 | 81 Count | 375 Count | 14 Count | 0 VDC | 0 VDC |
| 1773397549 | 80 Count | 374 Count | 14 Count | 0 VDC | 0 VDC |
| 1773395751 | 70 Count | 365 Count | 5 Count | 0 VDC | 0 VDC |
| 1773393950 | 65 Count | 361 Count | 1 Count | 0 VDC | 0 VDC |
| 1773392150 | 63 Count | 360 Count | 0 Count | 0 VDC | 0 VDC |
| 1773388548 | 61 Count | 360 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)