This is the latest recevied telemetry packets stored in our database for station/object VK2GJ-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vbat* | Vsol* | Psys* | Temp* | AirP* |
|---|---|---|---|---|---|
| 1749979861 | 4 V | 0 V | 248 mW | 26.9 degC | 100712.5 Pa |
| 1749979708 | 4 V | 0 V | 406 mW | 28.2 degC | 100700 Pa |
| 1749979682 | 4 V | 0 V | 332 mW | 27.7 degC | 100712.5 Pa |
| 1749979644 | 4 V | 0 V | 332 mW | 27.8 degC | 100700 Pa |
| 1749979407 | 4 V | 0 V | 328 mW | 27.4 degC | 100700 Pa |
| 1749979402 | 4 V | 0 V | 304 mW | 27.3 degC | 100700 Pa |
| 1749979108 | 4 V | 0 V | 284 mW | 26.6 degC | 100687.5 Pa |
| 1749978996 | 4 V | 0 V | 238 mW | 26.1 degC | 100687.5 Pa |
| 1749978846 | 4 V | 0 V | 222 mW | 25.5 degC | 100687.5 Pa |
| 1749978828 | 4 V | 0 V | 280 mW | 25.6 degC | 100700 Pa |
| 1749978701 | 4 V | 0 V | 220 mW | 25.2 degC | 100700 Pa |
| 1749978606 | 4 V | 0 V | 200 mW | 25 degC | 100687.5 Pa |
| 1749978549 | 4 V | 0 V | 182 mW | 25.1 degC | 100687.5 Pa |
| 1749978464 | 4 V | 0 V | 208 mW | 25.6 degC | 100687.5 Pa |
| 1749978377 | 4 V | 0 V | 286 mW | 25.8 degC | 100687.5 Pa |
| 1749978366 | 4 V | 0 V | 230 mW | 25.5 degC | 100687.5 Pa |
| 1749978298 | 4 V | 0 V | 186 mW | 25 degC | 100675 Pa |
| 1749978181 | 4 V | 0 V | 302 mW | 25.9 degC | 100687.5 Pa |
| 1749978145 | 4 V | 0 V | 188 mW | 25.4 degC | 100687.5 Pa |
| 1749978028 | 4 V | 0 V | 292 mW | 26.5 degC | 100687.5 Pa |
| 1749977958 | 4 V | 0 V | 344 mW | 26.7 degC | 100687.5 Pa |
| 1749977934 | 4 V | 0 V | 284 mW | 26.1 degC | 100687.5 Pa |
| 1749977930 | 4 V | 0 V | 270 mW | 26 degC | 100687.5 Pa |
| 1749977589 | 4 V | 0 V | 272 mW | 26 degC | 100675 Pa |
| 1749977518 | 4 V | 0 V | 268 mW | 26 degC | 100687.5 Pa |
*Used Equation Coefficients:
Vbat: 0, 0.001, 0
Vsol: 0, 0.001, 0
Psys: 0, 2, 0
Temp: 0, 0.1, -100
AirP: 0, 12.5, 500
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)